Read Sharp CD-BA250 User Guide / Operation Manual online
36
CD-BA250H(E)4.fm
01/2/8
Ad
v
a
nced Fe
atur
es
- Enhancing Y
our
System
-
Enhancing Your System
The connection lead is not included. Purchase a commercially available lead as
shown below.
shown below.
„
Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
„
To record on a tape
„
Headphones
z
Before plugging in or unplugging the headphones, reduce the volume.
z
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
z
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
volume using the VOLUME buttons.
VCR, DVD, etc.
To the line
output sockets
output sockets
Red
Red
RCA lead
(not supplied)
(not supplied)
White
White
1
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE
(
) button.
4
Press the / (TAPE 2 ) button.
5
Play the VCR, DVD, etc.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-BA250 service manuals if exist.