CD-BA250 (serv.man10) - Sharp Audio Service Manual (repair manual). Page 11

– 11 –

1

Top Cabinet

1. Screw ...................... (A1) x4

11-1

2

Side Panel

1. Screw ...................... (B1) x8

11-1

(Left/Right)

3

CD Player Unit/

1. Turn on the power supply, ..

11-2

CD Tray Cover

    open the disc tray, take out
    the CD tray cover, and close.
    (Note 1)
2. Screw ...................... (C1) x1
3. Hook ........................ (C2) x3
4. Hook ........................ (C3) x2
5. Socket ..................... (C4) x2

4

Rear Panel with

1. Screw .................... (D1) x10

11-2

Fan Motor

2. Socket ..................... (D2) x1

5

Main PWB

1. Screw ...................... (E1) x3 11-2,12-2
2. Socket ..................... (E2) x3
3. Flat Cable ............... (E3) x1
4. Flat Wire .................. (E4) x1

6

Front Panel

1. Screw ....................... (F1) x2

12-2

7

Display PWB

1. Screw .................... (G1) x12

12-3

2. Flat Cable ............... (G2) x1

8

Tape Mechanism 1. Open the cassette holder. ..

12-3

2. Screw...................... (H1) x5

9

Headphones PWB 1. Screw ....................... (J1) x1

12-3

10

Turntable

1. Hook ........................ (K1) x2

12-4

2. Cover ...................... (K2) x1

11

Disc Tray

1. Turn fully the lock  lever in the

11-3

arrow direction.

2. While holding the lock lever,rotate

12-1

the cam gear until the cam gear
rib engages with the clamp lever.

3. Push the slide chassis backward to 12-5

engage the claw with the groove
and remove it in the direction
of the arrow. ...............  (L1) x6

12

CD Servo PWB

1. Screw ...................... (M1) x1

12-6

(Note 2)

2. Hook ........................ (M2) x2
3. Socket ..................... (M3) x4

13

CD Mechanism

1. Hook ........................ (N1) x2

13-1

2. Hook ........................ (N2) x3

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need to

be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

Note 1: How to open the changer manually. (Fig. 11-3)
1. In this state, turn fully the lock lever in the arrow direction through

the hole on the loading chassis bottom.

2. While holding the lock lever, rotate the cam gear anticlockwise until the

cam gear rib engages with the clamp lever. (Fig. 12-1)

3. After that, push forward the CD slide chassis.

Note 2:
1. After removing the connector for the optical pickup from the

connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.

Lock Lever

CD Player Unit
(Bottom View)

(B1) x 4
ø3 x 10mm

(B1) x 2
ø3 x 10mm

Rear
Panel

(B1) x 2
ø3 x 10mm

Side Panel
(Right)

Side Panel
(Left)

(A1) x 2
ø3 x 12mm

(A1) x 2
ø3 x 12mm

Top Cabinet

(E1) x 1
ø3 x 10mm

(C3) x 1

(D1) x 2
ø3 x 10mm

(D2) x 1

CD Player
Unit

CD Tray  Cover

Pull

(C3) x 1

(C4) x 2

(C2) x 3

1

1

2

CD Servo
PWB

(C1) x 1
ø3 x 10mm

(D1) x 8
ø3 x 10mm

Rear
Panel

Main PWB

Lug Wire

Note 3:
1. Be careful not to break the claw of the CD mechanism.
2. When fining back the cam gear assembly, let it lock by front

movement.