CD-BA1700 - Sharp Audio User Guide / Operation Manual. Page 8

Read Sharp CD-BA1700 User Guide / Operation Manual online

8
(Continued)
 To mount the surround speakers on the 
wall
The design of the surround speakers allows them to be
hung on the wall. Be sure to use the type and size of screw
that is shown below.
1
Make a hole in the wall using a drill.
2
Drive a wall mount plug into the hole using a ham-
mer. Drive the wall mount plug in until it is flush with
the wall surface.
3
Drive one screw into the wall mount plug for each
speaker as shown in the illustration.
 Drive the screws, so there is about a 5 mm (3/16") space
between the wall and the head of the screw.
4
Mount the surround speaker on the wall so that the
screw head is inserted into the slot on the surround
speaker.
 
Note:
When the surround speakers are installed vertically, the
speaker badge will be upside down. In this case, you can
adjust the badge to face the proper direction. Just turn it by
hand.
 Removing the speaker grilles
1
Remove the lower part of the speaker grille first.
2
Remove the upper part of the speaker grille.
 Only the grilles on the upper woofers are removable.
Caution:
When the speaker grilles are removed, the speaker dia-
phragms are exposed. Make sure nothing comes into con-
tact with the speaker diaphragms.
 Mounting the speaker grilles
Fit the four posts on the speaker grille into the mounting
holes and push them lightly with your palm to secure.
 Connecting the AC power lead
Connect the AC power lead to the AC INPUT socket, then
connect the AC power lead plug to an AC socket.
Notes:
 Unplug the AC power lead from the AC socket if the unit
will not be in use for a prolonged period of time.
 Never use a power lead other than the one supplied. Use
of a power lead other than the one supplied may cause
an electric shock or fire.
32 mm
(1-1/4")
8-9 mm (3/8")
1
2
3.2 mm (1/8")
9 mm (3/8")
5 mm
(3/16")
Min.22 mm (7/8")
3
Wall surface
Wall mounting screw
4
Wall surface
Badge
(Front speakers only)
To AC INPUT
To an AC socket
AC 230 V, 50 Hz
Page of 36
Display

Click on the first or last page to see other CD-BA1700 service manuals if exist.