Read Sharp CD-BA1700 (serv.man6) Service Manual online
CD-BA160H/1700H
– 12 –
REMOVING AND REINSTALLING THE MAIN PARTS
TAPE MECHANISM SECTION
Perform steps 1 to 8 and 10 of the disassembly method to
remove the tape mechanism.
remove the tape mechanism.
How to remove the record/playback and erase
heads (Tape 2) (See Fig. 12-1)
heads (Tape 2) (See Fig. 12-1)
1. Carefully remove the record/playback head and erase head
screws (A1) x 2 pcs.
How to remove the playback head (Tape 1)
(See Fig. 12-2)
(See Fig. 12-2)
1. Carefully remove the playback head screws (B1) x 2 pcs.
How to remove the pinch roller (Tape1/2)
(See Fig. 12-3)
(See Fig. 12-3)
1. Carefully bend the pinch roller pawl in the direction of the
arrow <A>, and remove the pinch roller (C1) x1 pc., in the
direction of the arrow <B>.
direction of the arrow <B>.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the belt (Tape 1/2)
(See Fig. 12-4)
(See Fig. 12-4)
1. Remove the motor.
2. Remove the main belt (D1) x 1 pc., from the motor side.
3. Remove the FF/REW belt (D2) x 1 pc.
4. Remove the main belt (E1) x 1 pc., from the motor side.
5. Remove the FF/REW belt (E2) x 1 pc.
2. Remove the main belt (D1) x 1 pc., from the motor side.
3. Remove the FF/REW belt (D2) x 1 pc.
4. Remove the main belt (E1) x 1 pc., from the motor side.
5. Remove the FF/REW belt (E2) x 1 pc.
Figure 12-1
Figure 12-2
Figure 12-3
Figure 12-4
(A1)x2
Ø2 x 9mm
Ø2 x 9mm
TAPE2
Record/Playback
Head
Head
Erase
Head
Head
(B1)x2
Ø2 x 9mm
Ø2 x 9mm
TAPE1
Playback
Head
Head
TAPE2
TAPE1
Main Belt
(E1)x1
Main Belt
(E1)x1
TAPE2
Main Belt
(D1)x1
Main Belt
(D1)x1
TAPE1
Main Belt
(D1)x1
(D1)x1
FF/REW
Belt
(D2)x1
Belt
(D2)x1
FF/REW
Belt
(E2)x1
Belt
(E2)x1
Motor
Motor
Main Belt
(E1)x1
(E1)x1
Pinch Roller
(C1)x1
(C1)x1
<A>
Pinch
Roller
Pawl
Roller
Pawl
Pull
<B>
Pull
Click on the first or last page to see other CD-BA1700 (serv.man6) service manuals if exist.