Read Sharp CD-BA1300 User Guide / Operation Manual online
29
(Continued)
„
Timer recording
1
Press the ON/STAND-BY button to turn the power
on.
on.
z
Load a cassette for recording into the TAPE 2 cassette
compartment.
compartment.
2
Press the TUNER (BAND) button to select the
desired frequency band, and then adjust the sound
volume using the VOLUME buttons.
desired frequency band, and then adjust the sound
volume using the VOLUME buttons.
3
Press the TIMER/SLEEP button repeatedly until " "
and "REC" are displayed.
and "REC" are displayed.
z
The timer set indicator will flash.
4
Press the TUNING/TIME ( or ) button to set the
hour start time, then press the MEMORY/SET button.
hour start time, then press the MEMORY/SET button.
5
Press the TUNING/TIME ( or ) button to set the
minute start time, then press the MEMORY/SET but-
ton.
minute start time, then press the MEMORY/SET but-
ton.
z
The unit will enter the stand-by mode automatically, and
the timer set indicator will light up.
the timer set indicator will light up.
6
When the preset time is reached, the timer recording
will start.
will start.
z
The volume will increase gradually.
7
When the recording tape reaches its end, the timer
recording will end, and the unit will enter the stand-
by mode.
recording will end, and the unit will enter the stand-
by mode.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Start again from step 1.
Note:
z
Once the time is set, the setting will be retained until a
new time is entered.
new time is entered.
The unit will turn on and start recording from the radio at the
preset time.
preset time.
z
Before setting the timer, make sure that the clock setting
is correct (page 8).
is correct (page 8).
(Main unit operation)
TIMER/
SLEEP
Timer set indicator
ON/
STAND-BY
MEMORY/
SET
SET
VOLUME
TUNING/
TIME
( )
TIME
( )
TUNER
(BAND)
Click on the first or last page to see other CD-BA1300 service manuals if exist.