Read Sharp CD-BA1300 User Guide / Operation Manual online
21
(Continued)
„
To manually recall the stations stored in
memory
memory
Press the PRESET ( or ) button.
z
Each time the button is pressed, the channel number will
change.
change.
z
After the channel number has been displayed for 2 sec-
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
„
Notes for Radio text
z
The radio text for 8 characters will be displayed steadily
for 4 seconds and then it will scroll across the display.
for 4 seconds and then it will scroll across the display.
z
In the radio text position, "NO RT" will appear if the RDS
station is not broadcasting any radio text.
station is not broadcasting any radio text.
z
Whilst radio text data is received or when the text con-
tents change, "RT" will be displayed.
tents change, "RT" will be displayed.
„
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty.
unit is faulty.
z
"PS", "NO PS" and a station name appear alternately,
and the unit does not operate properly.
and the unit does not operate properly.
z
If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
station is conducting tests, the RDS reception function
may not work properly.
z
When you receive an RDS station whose signal is too
weak, information like the station name may not be dis-
played, even if "RDS" is lit.
weak, information like the station name may not be dis-
played, even if "RDS" is lit.
„
To switch the display
Each time the DISPLAY MODE button is pressed whilst an
FM station is tuned in, the display will switch as follows:
FM station is tuned in, the display will switch as follows:
When the station you are tuning in is not an RDS station or
even if it is an RDS station but it is very weak signal, the dis-
play will change in the following order:
even if it is an RDS station but it is very weak signal, the dis-
play will change in the following order:
Notes:
z
"NO PS" , "NO PTY" or "NO RT" will flash for about 5
seconds, and then the frequency will be displayed.
seconds, and then the frequency will be displayed.
z
The display can only be switched whilst tuned to the FM
band.
band.
(Main unit operation)
PRESET( )
(Main unit operation)
DISPLAY
MODE
MODE
Station
name (PS)
name (PS)
Programme
type (PTY)
type (PTY)
Radio text
(RT)
(RT)
Frequency
"NO PS"
"NO PTY"
"NO RT"
Frequency
Click on the first or last page to see other CD-BA1300 service manuals if exist.