AY-XP10CR (serv.man15) - Sharp Air Conditioner Service Manual (repair manual). Page 33

33

1. Open the opne panel, and remove 2 air filters.

2. Remove 4 screws fixing the front panel.

3. Remove the screw fixing the cord clamp.
Note :
During reassembly, install the holder after installing the
front panel. This will make it
easier to assemble the front panel.

4. Close the open panel. Pushing the nail of the front

panel.

5. Pull the front panel up.

6. Remove the unit-to-unit wiring from the terminal

board.

7. Remove a screw fixing the control box cover, and

remove it.

8. Remove 2 screws fixing the 2 ground wires and

terminal.

Note :
During reassembly, take care direction of the lead wires.