Read Sharp AY-A07B (serv.man2) User Guide / Operation Manual online
1
Remove the battery cover at the
back of the remote control.
back of the remote control.
2
Insert batteries in the compart-
ment, making sure the
ment, making sure the
±
and
—
polarities are correctly
aligned.
• Lines will be indicated on the
display when batteries are
properly installed.
properly installed.
3
Reinstall the battery cover.
USING THE REMOTE CONTROL
E-6
NOTES:
• The battery life is approximately one year in normal use.
• When you replace the batteries, always change both batteries, and make sure
• When you replace the batteries, always change both batteries, and make sure
they are the same type.
• If the remote control does not operate properly after replacing the batteries, take
out the batteries and reinstall them again after 30 seconds.
• If you will not be using the unit for a long time, remove the batteries from the
remote control.
Point the remote control towards
the unit’s signal receiver window
and press the desired button. The
unit generates a beep when it re-
ceives the signal.
the unit’s signal receiver window
and press the desired button. The
unit generates a beep when it re-
ceives the signal.
• Make sure there is no curtain or other
object between the remote control and
the unit.
the unit.
• The remote control can send signals
from up to 7 metres away.
LOADING BATTERIES
Use two size-AAA (R03) batteries.
HOW TO USE THE REMOTE CONTROL
Remote control
cover
＋
＋
−
−
Click on the first or last page to see other AY-A07B (serv.man2) service manuals if exist.