AH-X10 (serv.man12). Disassembly procedure - Sharp Air Conditioner Service Manual (repair manual)

ah-x10 (serv.man12) service manual
Model
AH-X10 (serv.man12)
Pages
7
Size
341.68 KB
Type
PDF
Document
Service Manual
Brand
Device
Air Conditioner / Disassembly procedure
File
ah-x10-sm12.pdf
Date

Read Sharp AH-X10 (serv.man12) Service Manual online

34
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
DISASSEMBLING PROCEDURE
FOR INDOOR UNIT [AY-X08BCR/X10CR/X13CR AND AH-X08CR/X10CR/X13CR]
CAUTION : DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE ANY 
SERVICING
1. Open the opne panel, and remove 2 air filters.
2. Remove 4 screws fixing the front panel.
3. Remove the screw fixing the cord clamp.
Note: During reassembly, install the holder after
installing the front panel. This will make it
easier to assemble the front panel.
4. Close the open panel. Pushing the nail of the front
panel.
5. Pull the front panel up.
6. Remove the unit-to-unit wiring from the terminal
board.
7. Remove a screw fixing the control box cover, and
remove it.
8. Remove a screw fixing the ground wire.
Note: During reassembly, take care for the
direction of the lead wire.
35
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
9. Remove the thermistor of the evaporator.
10. Remove 4 connectors.
11. Remove the thermistor holder from the evaporator.
12. Remove the display from the drain pan.
13. Remove the screw fixing the pipe holder.
14. Remove 3 screws fixing the control box, and remove
the control box.
15. Remove a screw fixing the drain pan.
16. Pull drain pan toward you.
CN1
CN6
CN3
CN2
36
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
17. Remove the drain cover from the evaporator.
Note: During reassembly, verify that the dew on
the pipe is led to the drain pan.
18. Remove 4 screws fixing the evaporator.
19. Remove the evaporator from the cabinet.
20. Remove 2 screws fixing the motor cover, and pull up
the fan.
21. Loose a screw fixing fan.
[Cautionary points for assembling the fan]
a. When inserting the motor shaft into the metal fan
boss, take care to prevent injuring the inner surface of
the metal fan boss.
b. Before fastening the motor shaft and fan, insert the
motor shaft into contact with the bottom of the metal
fan boss.
Fan motor
Motor shaft
Fan boss
Cross flow fan
37
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
How to remove the display cover
1. Push the center of display cover from the back.
2. Slide the display cover to the right.
How to assemble the display cover
1. Slide the left end of the display cover through 3 hooks
on the front panel along the guide from the center of
the front panel.
2. After the left half is inseted completely, press the
display cover and snap in the 3 hooks on the right.
How to remove the control box
2. Remove the screw fixing the terminal board.
1
2
1. Remove the photo detector unit.
(Press and spread the upper hook, and the photo
detector unit will be ready for removal.)
3. Remove a screw fixing the cord holder.
4. Remove 2 screws fixing the board (transformer).
5. Pull the board.
Page of 7
Display

Download Sharp AH-X10 (serv.man12) Service Manual (Repair Manual)

Here you can read online and download Sharp AH-X10 (serv.man12) Service Manual in PDF. AH-X10 (serv.man12) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AH-X10 (serv.man12) Air Conditioner. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.