TX-LR42E6 - Panasonic TV Service Manual (repair manual). Page 10

TX-LR42E6

10

1. Select [DRV Check - USBHDD Check] in Service Mode.
2. Press [OK] button on the remote control for more than 3 seconds.

1. Purpose

Restrict a function for hotels.

2. Access command to the Hotel mode setup menu.

In order to display the Hotel mode setup menu: 
While pressing [VOLUME (-)] button of the main unit,
press [AV] button of the remote control three times within
2 seconds.

Then, the Hotel mode setup menu is displayed.

3. To exit the Hotel mode setup menu

Disconnect AC power cord from wall outlet.

4. Explain the Hotel mode setup menu

Item

Function

Hotel Mode

Select hotel mode On/Off

Initial INPUT

Select input signal modes.
Set the input, when each time power is switched 
on.
Selection :
Off,Analogue,DVB-C,DVB-T,AV1,AV2,HDMI1,
HDMI2

• Off: give priority to a last memory. However, 

Euro model is compulsorily set to TV.

Initial POS

Select programme number.
Selection :
Off/0 to 99

• Off: give priority to a last memory.

Initial VOL LEVEL Adjust the volume when each time power is 

switched on.
Selection Range :
Off/0 to 100

• Off: give priority to a last memory.

Maximum Vol Level Adjust maximum volume.

Range :
0 to 100

Button Lock

Select local key conditions.
Selection :
Off/SETUP/MENU/ALL

• OFF: altogether valid
• SETUP: only F-key is invalid

      (Tuning guide (menu) can not be selected.) 

• MENU: only F-key is invalid

(only Volume/Mute can be selected.)

• ALL: altogether invalid.

Remote Lock

Select remote control key conditions.
Selection :
Off/SETUP/MENU

• OFF: altogether valid.
• SETUP: only Setup menu is invalid.
• MENU: Picture/Sound/Setup menu are invalid.

Private Information Select private information for VIERA Cast is Keep

or Reset if Hotel mode is set to [On] when TV
power on.
Selection :
Keep/Reset

• Keep: private information for VIERA Cast is 

keep

• Reset: private information for VIERA Cast is 

reset