Read Panasonic TX-LR32E5 Service Manual online
TX-LR32E5
12
6.2.
Power LED Blinking timing chart
1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality occurs, the protection circuit will operate and reset the unit to stand by mode. During this time, the
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
6.3.
No Power
First check point
There are following 2 states of No Power indication by power LED.
There are following 2 states of No Power indication by power LED.
1. No lit
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
Priority
Name
Factor
R_LED Blink
1
BL_SOS
SOS from PANEL inverter
1
2
POWER_SOS
SOS from POWER Curcuit
3
3
SOUND_SOS
SOS from audio AMP
9
Click on the first or last page to see other TX-LR32E5 service manuals if exist.