Read Panasonic TX-L42ET60B / TX-L42ET60Y / TX-LR42ET60 Service Manual online
Data Copy from TV set to USB Memory
1. Turn on the TV set.
2. Insert USB Memory with a startup file (pwd file) to USB Terminal.
2. Insert USB Memory with a startup file (pwd file) to USB Terminal.
On-screen Display will be appeared according to the startup file automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2770
(b) For Hotel: 4850
(b) For Hotel: 4850
Data will be copied from TV set to USB Memory.
It takes around 2 to 6 minutes maximum for copying.
It takes around 2 to 6 minutes maximum for copying.
4. After the completion of copying to USB Memory, remove USB Memory from TV set.
5. Turn off the TV set.
5. Turn off the TV set.
Note:
Following new folder will be created in USB Memory for data from TV set.
(a) For Board replacement: user_setup
(b) For Hotel: hotel
(b) For Hotel: hotel
Data copy
(Board replacement) or (Hotel)
(Board replacement) or (Hotel)
Input Password
2770
2770
or 4850
Performing
Completion
Performing
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Copy TV to Media
Please wait for a while
Please do not remove the Media
GETTING
Data Copy(Board replacement )
Data copy has been successful
Please remove Media
FINISH
18
Click on the first or last page to see other TX-L42ET60B / TX-L42ET60Y / TX-LR42ET60 service manuals if exist.