Read Panasonic TX-47PT1F (serv.man2) Service Manual online
−
6
−
TX-47PT1F
Note: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be
reconnected using jumper leads if necessary before power is applied to Receiver for service.
Front Decorative Panel ( Bottom )
1. The front decorative panel is secured by (2)
screws.
Screen Frame Ass’y
1. Remove (5) screws around rear cover’s perimeter.
2. The Center Decorative Panel is secured by (4)
striker pins. Grip the Center Decorative Panel at
the side corner pull to remove.
the side corner pull to remove.
3. Remove (4) screws which secured the Screen
Frame Ass’y.
4. Grasp the Screen Frame Ass’y on the sides at the
bottom. Pull out on bottom, push up the Screen
Frame Ass’y then pull out top edge.
Frame Ass’y then pull out top edge.
Screen
1. Place frame face down on soft surface.
2. Remove (10) screws.
3. Remove (5) screen fixing Metals.
2. Remove (10) screws.
3. Remove (5) screen fixing Metals.
% !"
Click on the first or last page to see other TX-47PT1F (serv.man2) service manuals if exist.