TX-32DK10F - Panasonic TV Service Manual (repair manual). Page 9

(The figures below are nominal and used for representative purposes only.)
1. Set the Bass to maximum position, set the Treble to minimum position, press the down button (- / v) on the customer

controls at the front of the TV and at the same time press the INDEX button on the remote control, this will place the TV
into the Service Mode.

2. Press the RED / GREEN buttons to step up / down through the functions.
3. Press the YELLOW / BLUE buttons to alter the function values.
4. Press the STR button after each adjustment has been made to store the required values.
5. To exit the Service Mode, press the "N" button.

Horizontal Position

H-Pos

+020

Optimum setting.

Vertical Position

V-Pos

+024

Optimum setting.

Horizontal Amplitude

H-Amp

+049

Optimum setting.

Vert. Amplitude

V-Amp

+029

Optimum setting.

EW-amplitude

E/W-Amp1

+022

Optimum setting.

EW-amplitude

E/W-Amp2

+000

Optimum setting.

Trapezium-comp

Trapez-1

+033

Optimum setting.

Horizontal-Parallel

H-Parallel

+032

Optimum setting.

Vertical Linearity

V-Lin

+004

Optimum setting.

DVCO

DVCO

000

Receive a PAL Colour Bar Pattern. For
DVCO alignment press "Blue" button, wait
until the colours are stable and press
"STR".

Cut-off DC

Cut-off

O.K.

To adjust Cutoff adjust the screen VR until
the display shows "O.K."

Highlight

High

0031 0031 0031

Contrast

Maximum

A.I.

Off

Optimum setting.

Sub-Brightness

Sub-Brightness

000

Optimum setting.