Read Panasonic TX-29P150T Service Manual online
from Video Cassette Tape
Players and Special VCRs
NTSC 4.43/6.0 MHz
NTSC 4.43/6.5 MHz
NTSC 3.58/5.5 MHz
NTSC 3.58/6.0 MHz
PAL 60 Hz/6.0 MHz
PAL 60 Hz/6.5 MHz
SECAM 60 Hz/6.0 MHz
SECAM 60 Hz/6.5 MHz
AV 1, 2, 3, 4
Video, Audio L/R terminals
AV2 IN (Front) : S-Video,
AV3 IN (Rear) : Video, Audio
AV4 IN (Rear) : Video or
Design and Specifications are subject to change without notice.
Weight and Dimensions shown are approximate.
found, replace all parts which have been overheated or
damaged by the short circuit.
isolation R-C combinations, are properly installed.
cover involves the danger of a shock hazard from the
receiver power supply. Servicing should not be attempted
by anyone who is not thoroughly familiar with the
precautions necessary when working on high voltage
equipment. Always discharge the anode of the picture tube
to the receiver chassis before handling the tube.
on the receiver, such as screw heads, aerials, connectors,
control shafts, etc. When the exposed metallic part has a
return path to the chassis, the reading should be between 4
there is a possibility of a shock hazard, and the receiver
should be repaired and rechecked before it is returned to
1. The potential sources of X-Radiation in TV sets are the EHT
high voltage meter.
1. Set the brightness to minimum.
2. Measure the High Voltage. The meter reading should
tolerance, immediate service and correction is required to
prevent the possibility of premature component failure.