Read Panasonic TX-29GX50T Service Manual online
2 Factory Mode Setting
2.1. Set to factory mode
1. Press the factory set button on remocon, together press volume down (front control), then appear the white pattern. In case of
releasing the remocon button, appear the black pattern an other case appear the volume bar. (Volume down).
2. Turn off and on the power, and set to aging mode.
3. Press any button on remocon or front panel.
Reset to aging-mode (white pattern), and display “CHK” on screen.
When it is no signal in this factory mode, it change to aging mode.
Aging set to aging mode method -- POWER OFF
→
ON
2.2. Operation on Aging mode.
1. White pattern appear, when reset start (POWER ON)
2. Press the factory set button, so that change to screen color.
White
→
Black
→
Red
→
Green
→
Blue
2.3. Set to Normal mode.
1. Press SELF CHECK MODE button or press the volume down button on front control, together press the off timer button on
remote controller.
5
TX-29GX50T
Click on the first or last page to see other TX-29GX50T service manuals if exist.