Read Panasonic TX-25MK1L Service Manual online
HOW TO MOVE THE CHASSIS INTO SERVICE POSITION
1.
Remove the bead clamper from the mains lead and attach to the degauss coil, shown in
Fig.5.
2.
Hold and lift the rear of the E-PCB chassis and gently pull the chassis toward you, as shown in
Fig.4.
3.
Release the respective wiring clips and rotate the chassis horizontally through 90
°
, anti-clockwise.
4.
Move the EHT lead around to the left side of the CRT neck.
5.
Elevate the front of the chassis.
6.
Clip the chassis frame onto the bead clamper, on the degauss coil, as shown in
Fig.5.
7.
Locate the base of the chassis frame into the hole (marked A), shown in
Fig.6.
8.
After servicing replace the bead clamper and ensure all wiring is returned to its original position before returning the
receiver to the customer.
receiver to the customer.
4
Fig.4.
Fig.5.
Fig.6.
(A)
Click on the first or last page to see other TX-25MK1L service manuals if exist.