TX-21FG20T - Panasonic TV Service Manual (repair manual). Page 7

Read Panasonic TX-21FG20T Service Manual online

2.5.1. +B Voltage
Item / preparation
 1. Operate the TV set.
 2. Set control as follows :
Brightness ........... minimum
Contrast ............... minimum
Adjustment procedure
 1. Confirm the DC voltage at the indicated test points, as
follows :
TPA 10 : 141.0 ± 1.5V
TPA 8 : 8 ± 1V
TPA 9 : 5 ± 1V
TPA 21 : 175 ± 15V
2.5.2. High Voltage
Item / preparation
 1. Receive the crosshatch pattern.
 2. Set to 0 Beam.
Screen VR .......... minimum
Contrast .............. minimum
Adjustment procedure
 1. Connect a DC voltage meter to TPA 10 and confirm the +B
voltage is 141.0 ± 1.5V.
 2. Connect a high frequency voltmeter to heater and confirm
that voltage reads 6.3 ± 0.24 (VRMS).
 3. Normalize the brightness and contrast.
2.5.3. NTSC TINT COLOUR
Item / preparation
 1. Connect oscilloscope probe to TPL1 (R OUT) with 10k
series resistor.
 2. Press Main Menu and set system to use AV-NTSC (3.58
MHz).
DYNAMIC ................... Normal
Channel CLR Set ..... STD
Adjustment procedure
 1. Adjust Sub-Tint so that No. 2, 3 and 4 becomes level
waveform is similar to Fig. 3.
 2. Confirm phase at Tint is changes more than ± 15 by Tint
control.
 3. Confirm that colour level is maximum when colour DAC is
adjusted to maximum position.
Note: Use remote control only when adjusting user mode to
Sub-Tint.
2.5. Adjustment Procedure
7
TX-21FG20T
Page of 29
Display

Click on the first or last page to see other TX-21FG20T service manuals if exist.