Read Panasonic TX-21AS1C / TX-21AS1D / TX-21AS1F (serv.man2) Service Manual online
HOW TO MOVE THE CHASSIS
INTO SERVICE POSITION
INTO SERVICE POSITION
1. Remove
2
screws
(A), as shown in Fig.4., and
remove speaker assembly.
2. Hold and lift the rear of the chassis and gently pull
the chassis toward you, as shown in Fig.5.
3. Release the respective wiring clips and move the
EHT lead around to the left side of the CRT neck.
4. Elevate the chassis as shown in Fig .6.
5. Using a speaker screw, screw the chassis frame into
5. Using a speaker screw, screw the chassis frame into
the top speaker fixing rib (B), as shown in Fig.6.
6. After servicing replace the speaker, and ensure all
wiring is returned to its original position before
returning the receiver to the customer.
returning the receiver to the customer.
SERVICEPOSITION FÜR DAS CHASSIS
1. Die 2 Schrauben(A) entfernen, wie in Abb. 4 dargestellt,
und die Lautsprechereinheit herausnehmen.
2. Das Chassis leicht anheben und nach hinten herausziehen,
wie in Abb. 5 dargestellt.
3. Die Befestigungen des Hochspannungskabels lösen und das
Kabel zur linken Seite des Röhrenhalses legen.
4. Das Chassis, wie in Abb. 6 gezeigt, herausheben.
5. Mit einer Lautsprecherschraube den Chassisrahmen durch das
5. Mit einer Lautsprecherschraube den Chassisrahmen durch das
Langloch auf der rechten Seite des Rahmens im oberen
Befestigungsloch des Lautsprechers fixieren. Siehe Abb. 6.
Befestigungsloch des Lautsprechers fixieren. Siehe Abb. 6.
6. Nach Beendigung der Reparatur ist sicherzustellen,daß sich
alle Kabel in ihrer ursprünglichen Position befinden.
5
(A)
Fig .5.
Abb.5.
Fig .4.
Abb.4.
(B)
Fig .6.
Abb.6.
Click on the first or last page to see other TX-21AS1C / TX-21AS1D / TX-21AS1F (serv.man2) service manuals if exist.