Read Panasonic TH-98SQ1W (serv.man2) Service Manual online
8
PREFACE
<98SQ1>
English
26
PC IN
Mini D-sub 15 Pin (Compatible with DDC2B) × 1
Y/G:
Y/G:
1.0 Vp-p (75 ) (with sync signal)
0.7 Vp-p (75 ) (without sync signal)
0.7 Vp-p (75 ) (without sync signal)
P
B
/C
B
/B:
0.7 Vp-p (75 ) (without sync signal)
P
R
/C
R
/R:
0.7 Vp-p (75 ) (without sync signal)
HD/VD:
TTL (high impedance)
AUDIO IN 1
Stereo mini jack (M3) × 1, 0.5 Vrms
AUDIO IN 2
Stereo mini jack (M3) × 1, 0.5 Vrms
AUDIO OUT
Stereo mini jack (M3) × 1, 0.5 Vrms
Output: Variable (-∞ ‒ 0 dB)
Output: Variable (-∞ ‒ 0 dB)
(1 kHz 0 dB input, 10 k load)
SERIAL IN
External Control Terminal
D-sub 9 Pin × 1:
D-sub 9 Pin × 1:
RS-232C compatible
LAN
RJ45 × 1:
For network connection, compatible with PJLink
Communication method:
RJ45, 10BASE-T / 100BASE-TX
DIGITAL LINK / LAN
RJ45 × 1:
For network connection, DIGITAL LINK
connection, compatible with PJLink
Communication method:
RJ45, 100BASE-TX, long reach mode is
supported
IR IN
Stereo mini jack (M3) × 1
IR OUT
Stereo mini jack (M3) × 1
USB
USB connector × 2, TYPE A
DC 5V/1A (front side terminal),
DC 5V/1A (front side terminal),
DC 5V/2A (far side terminal)
EXT SP
8 , 30 W [15 W + 15 W] (10 % THD)
Sound
Speakers
15 mm × 25 mm × 1 / φ 70 mm × 1 × 2 pieces
Audio Output
20 W [10 W + 10 W] (10 % THD)
Remote Control Transmitter
Power source
DC 3 V (battery (AAA/R03/LR03 type) × 2)
Operating range
Approx. 7 m (22.9 ft)
(when operated directly in front of remote control
(when operated directly in front of remote control
sensor)
Mass
Approx. 63 / 2.22 oz (including batteries)
Dimensions (W × H × D)
48 mm × 134 mm × 20 mm / 1.89” × 5.28” × 0.76”
*
1: Environmental temperature to use this unit at high
altitudes (1 400 m (4 593 ft) and higher and below
2 800 m (9 186 ft) above sea level): 0 °C to 35 °C
(32 °F to 95 °F)
*
2: VIERA LINK is not supported.
Note
●
Design and specifications are subject to change
without notice. Mass and dimensions shown are
approximate.
Click on the first or last page to see other TH-98SQ1W (serv.man2) service manuals if exist.