Read Panasonic TH-80BF1U / TH-80BF1W / TH-80BF1E Service Manual online
ADJ-9
SECTION 3 ADJUSTMENTS
<80BF1>
2.2.2. Inspection for removed front cabinet alone with Touch Panel Module
2.3. Procedure of touch panel inspection
3. Connection
3-1. Inspection for complete product
3-2. Inspection for removed front cabinet alone with touch panel module
*All touch panel modules need to be connected by FFC.
Go to 4. Procedure.
3-1-1.
3-1-2.
3-1-3.
3-1-4.
Turn off the power of the unit.
Connect USB B-type terminal to the BF1 unit and USB A-type terminal to the PC with USB
cable.
Turn on the power of the unit and set the input HDMI,PC,… except “WHITE BORAD”.
Go to 4. Procedure.
3-2-1.
Connect the Cable from touch panel main board to the conversion harness for the touch
module (JIG).
3-2-3.
3-2-2.
Connect USB B-type terminal to the conversion harness for the touch module (JIG) and USB
A-type terminal to the PC with USB cable.
BF1
PC
USB Cable
USB-A
USB-B
Cable (Touch panel main PCB to
display main PCB)
Touch panel
Main Board
PC
USB Cable
JIG:TZSH07040
Front cabinet
with touch panel
module
USB-A
USB-B
Touch panel
module
Main
Board
- 2 -
4. Procedure of touch panel inspection
Execute the file “screenDiagnose.exe.” in the folder “TouchPanel_CheckTool".
Press the “Space” key twice and move into the inspection mode.
Please refer to below example to inspect.
(The location of touch panel module is displayed automatically depending on the size of unit.)
4-1.
4-2.
4-3.
O K
N G
Abnormal Part (T64-01 board)
*Sample: 80 inch
To exit the inspection mode, press the “Esc” key.
4-4.
- 3 -
Click on the first or last page to see other TH-80BF1U / TH-80BF1W / TH-80BF1E service manuals if exist.