Read Panasonic TH-55LFV6U / TH-55LFV6W / TH-55LFV60U / TH-55LFV60W Service Manual online
INF-3
SECTION 1 SERVICE INFORMATION
<55LFV6/55LFV60>
1. 2. Connecting terminals
11
12
2
1
3
4
5
6
7
8
9
10
1
EXT SP:
Speaker Terminal
Connect to external speaker.
(see page 26)
2
PC IN:
PC Input Terminal
Connect to video terminal of PC,
video equipment with “YP
video equipment with “YP
B
P
R
/
YC
B
C
R
” or “RGB” output.
(see page 20)
3
AUDIO1 IN:
Audio input terminal shared
with DVI-D IN and PC IN
with DVI-D IN and PC IN
(see page 19, 20)
4
COMPONENT /
RGB /
VIDEO IN:
RGB /
VIDEO IN:
COMPONENT / RGB Video
Input Terminal (R/P
Input Terminal (R/P
R
/C
R
, B/P
B
/
C
B
, G/Y)
Connect to video equipment
with “YP
with “YP
B
P
R
/ YC
B
C
R
” or “RGB”
output.
(see page 22)
Composite Video Input
Terminal (VIDEO)
Terminal (VIDEO)
Connect to video equipment with
Composite signal output.
Composite signal output.
(see page 21)
5
AUDIO2 IN:
Audio Input Terminal shared
with COMPONENT/RGB IN and
VIDEO IN
with COMPONENT/RGB IN and
VIDEO IN
(see page 21, 22)
6
AUDIO OUT:
Analogue Audio Output
Terminal
Terminal
Connect to audio equipment with
analogue audio input terminal.
analogue audio input terminal.
(see page 25)
7
LAN:
LAN Terminal
Control the Display by connecting
to Network.
to Network.
(see page 72)
8
AV IN
(HDMI 1,
HDMI 2):
HDMI 2):
HDMI Input Terminal
Connect to video equipment such
as VCR or DVD player, etc.
as VCR or DVD player, etc.
(see page 18)
9
DVI-D IN,
DVI-D OUT:
DVI-D OUT:
DVI-D Input / Output Terminal
Connect to video equipment
with DVI-D output. Also, when
displaying the picture by daisy
chaining multiple displays,
connect to the other display.
with DVI-D output. Also, when
displaying the picture by daisy
chaining multiple displays,
connect to the other display.
(see page 19)
10 USB:
USB Memory Terminal
Connect the USB memory to use
[USB media player]. Also, this
can be used to supply power of
up to 5V/1A to an external device
when receiving images.
[USB media player]. Also, this
can be used to supply power of
up to 5V/1A to an external device
when receiving images.
(see page 26, 85)
Video equipment connection
17
English
Before connecting
●
Before connecting cables, carefully read the operating
instructions for the external device to be connected.
instructions for the external device to be connected.
●
Turn off the power of all devices before connecting
cables.
cables.
●
Take note of the following points before connecting
the cables. Failure to do so may result in
malfunctions.
the cables. Failure to do so may result in
malfunctions.
•
When connecting a cable to the unit or
a device
connected to the unit itself, touch any nearby
metallic objects to eliminate static electricity from
your body before performing work.
metallic objects to eliminate static electricity from
your body before performing work.
•
Do not use unnecessarily long cables to connect
a device to the unit or to the unit body. The
longer the cable, the more susceptible to noise it
becomes. Since using a cable while it is wound
makes it act like an antenna, it is more susceptible
to noise.
a device to the unit or to the unit body. The
longer the cable, the more susceptible to noise it
becomes. Since using a cable while it is wound
makes it act like an antenna, it is more susceptible
to noise.
•
When connecting cables, connect GND first, then
insert the connecting terminal of the connecting
device in a straight manner.
insert the connecting terminal of the connecting
device in a straight manner.
●
Acquire any connection cable necessary to connect
the external device to the system that is neither
supplied with the device nor available as an option.
the external device to the system that is neither
supplied with the device nor available as an option.
●
If the outer shape of the plug of a connection cable
is large, it may come in contact with the plug of an
adjacent connection cable. Use a connection cable
with the suitable plug size for the terminal alignment.
is large, it may come in contact with the plug of an
adjacent connection cable. Use a connection cable
with the suitable plug size for the terminal alignment.
●
If video signals from video equipment contain too
much jitter, the images on the screen may wobble.
In this case, a time base corrector (TBC) must be
connected.
much jitter, the images on the screen may wobble.
In this case, a time base corrector (TBC) must be
connected.
●
When the sync signals output form PC or video
equipment are disturbed, for example, when changing
settings of video output, the colour of the video may
be disturbed temporarily.
equipment are disturbed, for example, when changing
settings of video output, the colour of the video may
be disturbed temporarily.
●
The unit accepts Composite video signals, YC
B
C
R
/
YP
B
P
R
signals, analogue RGB signals and digital
signals.
●
Some PC models are not compatible with the unit.
●
Use cable compensator when you connect devices to
the unit using long cables. Otherwise the image may
not display properly.
the unit using long cables. Otherwise the image may
not display properly.
●
Refer to “Preset Signals” (see page 93) for the types
of video signals that can be displayed with the unit.
of video signals that can be displayed with the unit.
11 IR IN, IR OUT:
Infrared Signal Input / Output
Terminal
Terminal
Use this when operating more
than one display with one remote
control.
than one display with one remote
control.
It is possible to receive signal
from the remote control by
connecting the supplied external
IR receiver to the IR IN terminal.
from the remote control by
connecting the supplied external
IR receiver to the IR IN terminal.
(see page 25)
12 SERIAL IN,
SERIAL OUT:
SERIAL Input / Output Terminal
Control the Display by connecting
to PC.
to PC.
(see page 22)
Click on the first or last page to see other TH-55LFV6U / TH-55LFV6W / TH-55LFV60U / TH-55LFV60W service manuals if exist.