Read Panasonic TH-55LFE8W / TH-55LFE8U / TH-55LFE8C / TH-55LFE8E Service Manual online
ADJ-4
SECTION 3 ADJUSTMENTS
1.2. SUB MCU software updating
1.2.1. Tools and preparation
1. Computer : Used for firmware transforming
2. Communication cable : D-sub 9pin (female/female RS-232C straight)
3. Software & updating file : SerialLoader v1.00& firmware (LFE8_SUB_Vxxxx.ldr), download from service web site.
4. Extract the software and file package to your favorite directory on your computer.
5. Connect the serial terminal (SERIAL-IN) and PC with an RS-232C cable.
1.2.2. Updating procedure
1. Start up the updating software [SerialLoader.exe].
2. Choose available COM port with pull down menu and click [OK]. The
baudrate should be used with "115200".
3. On the left window, browse and select a folder where the updating file
is stored. The firmware file is listed on the right window and select it
then click [Add]. The selected firmware will listed on the bottom window.
4. Click [OK]. The another confirmation window will appear and then click [OK] to start updating.
5. After finishing the updating, the window below appear and click [OK] to close the software.
6. Turn of the Main switch and then on again. Confirm the version number in the CD mode of
CAT mode.
* During updating, Do not disconnect
the AC cord or serial cable other-
wise the Display may not turn on.
SAMPLE
SAMPLE
Click on the first or last page to see other TH-55LFE8W / TH-55LFE8U / TH-55LFE8C / TH-55LFE8E service manuals if exist.