Read Panasonic TH-55LFE8W / TH-55LFE8U / TH-55LFE8C / TH-55LFE8E Service Manual online
INF-10
SECTION 1 SERVICE INFORMATION
3. 5. Network connection check mode (NW Mode)
• To check the network connection, take the procedure below.
Make sure to set the "Control I/F Select" to "LAN" or “RS232C” to use this function.
1. Display the CAT mode (Refer to 3.1.).
2. The CAT mode menu appears on the screen. Select the [NW Mode] menu with [pq] buttons and press the [ENTER] button
to enter the NW mode.
3. Press the [ENTER] button to start the network connection check. The check result will be displayed in a few seconds.
To exit the NW mode
Press the [RETURN] button to return to the CAT mode menu
CAT Panel sys.8.2
IIC Mode
CD Mode
NW Mode
SD Mode
MS Mode
ID Mode
Displays the result of [TEST]
•
OK
: There is a response of PING
•
NG
: Time Out
•
BSY
: On test executing
• G_NG
: No response of PING
•
L_NG
: A LINK state is not established
Click on the first or last page to see other TH-55LFE8W / TH-55LFE8U / TH-55LFE8C / TH-55LFE8E service manuals if exist.