Read Panasonic TH-55AF1U / TH-55AF1W (serv.man2) Service Manual online
ADJ-9
SECTION 3 ADJUSTMENTS
<55AF1>
2.3. Cloning procedure (Service Mode)
1. Insert USB Memory to the USB interface.
2. Display the CAT mode (Refer to Section 1 - 3.1.)
3. Press the [SETUP] button to display the setup menu on the screen. Select [OSD LANGUAGE] menu with [pq] buttons
and press and hold the [ENTER] button for more than 3 seconds.
The below window will appear. (USB Data cloning is gray out when USB Memory is not inserted.)
4. Select [USB Data Cloning] menu with [pq] buttons and press ENTER button. The below window will appear.
5. Select [Board Replace] menu with [pq] buttons and press enter button. The below window will appear.
5.1. Display→USB Memory
Select [Display→USB Memory] and then click [Yes] to start cloning.
After finishing the copying, the window below appear.
5.2. USB Memory→Display
Select [USB Memory→Display] and then click [Yes] to start cloning.
After finishing the copying, the window below appear.
5.3. After data copy has finished, remove the USB memory device from the USB terminal.
Press the <Main Power On / Off button> to turn the power OFF, and turn the power ON again.
The copied content is applied to the display.
103
6
で「YES」を選び、<ENTER>
を押す
USB メモリーへのデータコピーが開始します。
The data will be overwritten when any data exists originally.
Are you OK to write the data?
Data to USB Memory
YES
NO
データコピーが終わると表示します。
Data copy finished.
7
データのコピーが終わったら USB 端子
から USB メモリーを抜き取る
USB メモリーのデータをディスプレイ
にコピー
1
データコピー先のディスプレイ底部の
USB 端子に、データコピー後の USB
メモリーを挿入する(102 ページの手
順 1 と同じ)
「Select Copy Type」画面が出たら手順 5 へ進む
お知らせ
●
電源「入」のときに、クローン用のデータが保
存された USB メモリーを接続すると、手順 5
存された USB メモリーを接続すると、手順 5
「Select Copy Type」のメッセージが表示され
ます。
2
<SETUP> を押して「初期設定」メ
ニューを表示する
3
で「表示言語切換」を選び、
<ENTER> を 3 秒以上押す
以下のような画面が表示されます。
Options
Display serial number
Shipping
USB data cloning
Software licenses
OpenPort PLATFORM Shutdown
4
で「USB data cloning」を選び、
<ENTER> を押す
5
で「USB Memory → Display」
を選び、<ENTER> を押す
Select Copy Type
Display → USB Memory
USB Memory → Display
6
で「YES」を選び、<ENTER>
を押す
ディスプレイへのデータコピーが開始します。
Do you copy the data?
Data from USB Memory
YES
NO
データコピーが終わると表示します。
Cloning finished.
Please turn off the power.
7
データのコピーが終わったら USB 端子
から USB メモリーを抜き取る
8
ディスプレイ本体の電源ボタン
( / )
を押して電源を「切」にした後、再度「入」
にする
コピーした内容がディスプレイに反映されます。
※ 電源ボタンがロックされている場合は、電源プラ
※ 電源ボタンがロックされている場合は、電源プラ
グをコンセントから抜いてください。
※ 手順 7 で USB メモリーを抜き取らなかった場
合、本機の電源を入れなおしたときに、「Select
Copy Type」と表示されます。
Copy Type」と表示されます。
お知らせ
●
「POWER button lock」を「On」に設定したデー
タをコピーした場合、電源を切った後にこの機能が
動作して、本体の電源ボタンで電源を入れることが
できません。この場合は、電源プラグを抜いて十分
に時間を空けてから再び電源プラグを接続して電源
を入れてください。
動作して、本体の電源ボタンで電源を入れることが
できません。この場合は、電源プラグを抜いて十分
に時間を空けてから再び電源プラグを接続して電源
を入れてください。
Click on the first or last page to see other TH-55AF1U / TH-55AF1W (serv.man2) service manuals if exist.