Read Panasonic TH-49LF8U / TH-49LF8W (serv.man2) Service Manual online
ADJ-6
SECTION 3 ADJUSTMENTS
<49LF8>
2. USB Cloning
2.1. Copy Data
1) General Mode/Service Mode(Selected User Menu Data)
"Picture Adjustment Data", "Sound Adjustment Data", "Initial Setting", "Position Data", "Options Menu setting",
"Adjustment Data"
*Following Data is not copied.
Date and Time
Network setting: LAN Setting
Options : Display ID
2) Service Mode (Selected Board Replace)
All data except Date and Time
Note: The Copy of Data (USB Memory → Display) is not available when Data of Model and Size and
Destination do not match.
2.2. Cloning procedure (General Mode)
1. Insert USB Memory to the USB interface.
2. Press the [SETUP] button to display the setup menu on the screen. Select [OSD LANGUAGE] menu with [pq] buttons
and press and hold the [ENTER] button for more than 3 seconds.
The below window will appear. (USB Data cloning is gray out when USB Memory is not inserted.)
3. Select [USB Data Cloning] menu with [pq] buttons and press ENTER button. The below window will appear.
3.1. Display→USB Memory
Select [Display→USB Memory] and then click [Yes] to start cloning.
After finishing the copying, the window below appear.
3.2. USB Memory→Display
Select [USB Memory→Display] and then click [Yes] to start cloning.
After finishing the copying, the window below appear.
4. Turn off the Main switch and then on again. Confirm the version number in the CD mode of CAT mode.
Click on the first or last page to see other TH-49LF8U / TH-49LF8W (serv.man2) service manuals if exist.