Read Panasonic TH-42LF30ER / TH-47LF30ER Service Manual online
CD mode
Select the CD mode by Up/Down button on the remote control at the front page of CAT mode and then press
the Mute button on the remote control more than 3 seconds.
the Mute button on the remote control more than 3 seconds.
Memory data change
To exit the CD mode, press the R button on the remote control.
SD mode
Select the SD mode by Up/Down button on the remote control at the front page of CAT mode and then press
the Action button on the remote control.
the Action button on the remote control.
To exit the SD mode, press the R button on the remote control.
Input command
check
MTBF Parameter WT PT
TE
Condition
Sensor
MTBF Parameter WT PT
TE
Condition
Sensor
SD
History of remote control command.
(Faktory use).
(Faktory use).
Cumulative Time for power on condition. (unit :hour)
Temperature of A-board
OSD
4F 4E 4A 4B 4A 4E
4F
4E 4F 4E 4F 4E 4F 20
21 22 21 34 4B 49
4
0
+25
Counter of power on. (unit :time)
MONITOR-MCU 1.0100S30 OK
MONITOR-EEPROM 01.00 20 2152
MONITOR-EEPROM Change Addr 00 00
Data 03 03
MONITOR SUB MCU 01.01
BOARD EEPROM PC -- -- -- --
BOARD --/--/-- -- -- --
PTCT
MONITOR SUB MCU 01.01
BOARD EEPROM PC -- -- -- --
BOARD --/--/-- -- -- --
PTCT
00. 00. 00. 00. 00.
CD
Factory use
New data
Original data
SOS history
0
0
Address
Change by Up/Down buttons on the remote control.
Change by Left/Right buttons on the remote control.
0
0
Data
Change by VOL Up/Down buttons on the remote control.
The data is memorized when switch off the main power.
118
Contrast Automatic Tracking System sensor
0
14
Click on the first or last page to see other TH-42LF30ER / TH-47LF30ER service manuals if exist.