Read Panasonic CT-34WDM60 Service Manual online
- 22 -
Exchange method for HM-Module, DP-Module, GY-Module, and X-Module
*
Remove the J-Module in advance. (Refer to the preceding item.)
Exchange method for the rear termi-
nal, input switching J-Module
nal, input switching J-Module
(1) Remove the read panel fixing screws (5 screws:
to
)
and the fixing tabs (2 places). (Refer to Fig. 8.)
(2) Remove the screws (2 screws:
/
) fixing the J-Module,
tilt the J-Module to the front and pull it out, and then
exchange the J-Module.
exchange the J-Module.
Fig.8
Module exchange
1
5
6
7
7
1
3
F-Board
Rear Bracket
AC-Code
5
4
2
6
Tab
Fig.9 Exchange of each module - 1 (seen from above)
(1) Remove the setscrews (3 screws:
to
) of the module
fixing fittings and the couplers X3 and X4. (Refer to Fig.
9.)
9.)
(2) Remove the setscrew (1 screw:
) of the fixing fitting of
the P-Board, and pull the fixing fitting of the HM-Module to
the front to remove the module fixing fitting. (Refer to Fig.
9.)
the front to remove the module fixing fitting. (Refer to Fig.
9.)
Fig.10 Exchange of each module - 2 (view from the rear)
(3) After removal of the module fixing fitting, pull out each
module and exchange it. (Refer to Fig. 10.)
*
When GY-Module has been exchanged, refer to pages 29
and 30 and perform the respective adjustments.
and 30 and perform the respective adjustments.
4
1
3
2
Module Plate
HM-Module Plate
HM-Module
1
3
4
U-Module
GY-Module
DP-Module
HM-Module
!"#$
Click on the first or last page to see other CT-34WDM60 service manuals if exist.