KX-TG8061RUB, KX-TG8061UAB, KX-TG8061CAB, KX-TGA806RUB - Panasonic Telephone Service Manual (repair manual). Page 8

Read Panasonic KX-TG8061RUB / KX-TG8061UAB / KX-TG8061CAB / KX-TGA806RUB Service Manual online

8
KX-TG8061RUB/KX-TG8061UAB/KX-TG8061CAB/KX-TGA806RUB
4.2.
Circuit Operation (Base Unit)
4.2.1.
Outline
Base Unit consists of the following ICs as shown in Block Diagram (Base Unit) (P.7).
• DECT BBIC (Base Band IC): IC7
- Handling all the audio, signal and data processing needed in a DECT base unit
- Controlling the DECT specific physical layer and radio section (Burst Module Controller section)
- ADPCM code filter for speech encoding and speech decoding (DSP section)
- Echo-cancellation and Echo-suppression (DSP section)
- Any tones (tone, sidetone, ringing tone, etc.) generation (DSP section)
- DTMF receiver (DSP section)
- Clock Generation for RF Module
- ADC, DAC, timer, and power control circuitry
- PLL Oscillator
- Detector 
- Compress/Expander
- First Mixer
- All interfaces (ex: QSPI FLASH MEMORY, EEPROM, LED, Analog Front End, etc.)
- DCDC Converter
- Integrated 1.9GHz PA for DECT
• EEPROM: IC401
- Temporary operating parameters (for RF, etc.)
• FLASH MEMORY: IC421
- Voice Prompt (TAM) D/L Area
- ICM/OGM Recording Area
• Additionally,
- Power Supply Circuit (+3.0 V, +2.4 V, +1.8 V output)
- Crystal Circuit (10.368 MHz)
- Charge Circuit
- Telephone Line Interface Circuit
• QSPI FLASH MEMORY IC431
- Main Program D/L Area
Page of 91
Display

Click on the first or last page to see other KX-TG8061RUB / KX-TG8061UAB / KX-TG8061CAB / KX-TGA806RUB service manuals if exist.