Read Panasonic KX-TG8011RUC / KX-TG8011RUS / KX-TG8011RUT / KX-TG8012RUS / KX-TG8012RUT / KX-TGA800RUC / KX-TGA800RUS / KX-TGA800RUT Service Manual online
94
KX-TG8011RU/KX-TG8012RU/KX-TGA800RU
15.5. Replacement Part List
1. RTL (Retention Time Limited)
Note:
The “RTL” marking indicates that its Retention Time is
Limited.
When production is discontinued, this item will con-
tinue to be available only for a specific period of time.
This period of time depends on the type of item, and
the local laws governing parts and product retention.
At the end of this period, the item will no longer be
available.
Limited.
When production is discontinued, this item will con-
tinue to be available only for a specific period of time.
This period of time depends on the type of item, and
the local laws governing parts and product retention.
At the end of this period, the item will no longer be
available.
2. Important safety notice
Components identified by the mark indicates special
characteristics important for safety. When replacing any
of these components, only use specified manufacture’s
parts.
characteristics important for safety. When replacing any
of these components, only use specified manufacture’s
parts.
3. The S mark means the part is one of some identical parts.
For that reason, it may be different from the installed part.
4. ISO code (Example: ABS-94HB) of the remarks column
shows quality of the material and a flame resisting grade
about plastics.
about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms (
All resistors are in ohms (
Ω) k=1000Ω, M=1000kΩ
All capacitors are in MICRO FARADS (
µF)p=µµF
*Type & Wattage of Resistor
15.5.1. Base Unit
15.5.1.1. Cabinet and Electrical Parts
15.5.1.2. Main P.C.Board Parts
Note:
(*1) When replacing IC7, IC401 or X1, make the adjustment
using PNZZTG8011RU. Refer to Base Unit (P.65) of
Things to Do after Replacing IC or X'tal.
(*2) When you removing E1, use special tools (ex. Hot air
disordering tool).
(*3) Backside of this IC has a ground plate.
(*4) Supplied IC is Flat Package Type.
using PNZZTG8011RU. Refer to Base Unit (P.65) of
Things to Do after Replacing IC or X'tal.
(*2) When you removing E1, use special tools (ex. Hot air
disordering tool).
(*3) Backside of this IC has a ground plate.
(*4) Supplied IC is Flat Package Type.
Safety
Ref.
No.
Part No.
Part Name & Description
Remarks
1
PNKM1010Y3
CABINET BODY (for KX-
TG8011RUC)
TG8011RUC)
PS-HB
1
PNKM1010Y5
CABINET BODY (for KX-
TG8011RUS)
PS-HB
1
PNKM1010Y7
CABINET BODY (for KX-
TG8011RUT)
TG8011RUT)
PS-HB
2
PNKE1001Y4
CHARGE CASE (for KX-
TG8011RUC)
TG8011RUC)
PS-HB
2
PNKE1001Y3
CHARGE CASE (for KX-
TG8011RUS)
PS-HB
2
PNKE1001Y2
CHARGE CASE (for KX-
TG8011RUT)
TG8011RUT)
PS-HB
3
PNJT1003Z
CHARGE TERMINAL
4
PNBC1017Y3
LOCATOR BUTTON (for KX-
TG8011RUC/RUS)
TG8011RUC/RUS)
ABS-HB
4
PNBC1017Y5
LOCATOR BUTTON (for KX-
TG8011RUT)
ABS-HB
5
K2ECYZ000001
JACK, DC
6
PQJJ1T039Y
JACK, MODULAR
7
PNLA1002Z
ANTENNA
8
PNKF1002Z3
CABINET COVER (for KX-
TG8011RUC)
TG8011RUC)
PS-HB
8
PNKF1002Z6
CABINET COVER (for KX-
TG8011RUS)
TG8011RUS)
PS-HB
8
PNKF1002Z1
CABINET COVER (for KX-
TG8011RUT)
TG8011RUT)
PS-HB
9
PQHA10023Z
RUBBER PARTS FOOT CUSHION
10
PNGT1813X
NAME PLATE (for KX-
TG8011RUC)
TG8011RUC)
10
PNGT1813Y
NAME PLATE (for KX-
TG8011RUS)
10
PNGT1813Z
NAME PLATE (for KX-
TG8011RUT)
TG8011RUT)
Safety
Ref.
No.
Part No.
Part Name & Description
Remarks
PCB1
PNWPG7301RUH MAIN P.C.BOARD ASS'Y
(RTL)
(ICs)
IC1
C0CBAYG00016 IC
S
IC7
C1CB00002906 IC (BBIC(FLASH))
(*1)(*3)(*4)
IC401
PQWID300NEHR IC (EEPROM) (*1)
IC801
C1CB00001842 IC (*3)
(TRANSISTORS)
Q2
B1ABCE000009 TRANSISTOR(SI)
Q3
B1ADMQ000001 TRANSISTOR(SI)
Q4
PQVTBF822T7
TRANSISTOR(SI)
Q5
2SD1994A
TRANSISTOR(SI)
Q8
B1ADGE000004 TRANSISTOR(SI)
Q9
B1ADGE000004 TRANSISTOR(SI)
(DIODES)
D1
B0JCME000035 DIODE(SI)
D3
B0EDER000009 DIODE(SI)
D9
MA111
DIODE(SI)
S
D21
PQVDRLZ20A
DIODE(SI)
S
D22
B0ECKM000008 DIODE(SI)
D23
MA8220
DIODE(SI)
S
D801
MA27P1200L
DIODE(SI)
D802
MA27P1200L
DIODE(SI)
DA1
B0DDCL000001 DIODE(SI)
(COILS)
L1
PQLQXF330K
COIL
S
L2
PQLQXF330K
COIL
S
L7
PQLQR4C15NJ
COIL
S
L801
PQLQR4C22NJ
COIL
S
L802
G1C4N7Z00006 COIL
L803
G1C4N7Z00006 COIL
L804
G1C4N7Z00006 COIL
(COMPONENTS PART)
RA402
D1H410320002 RESISTOR ARRAY
(VARISTOR)
SA1
J0LF00000026 VARISTOR
(RESISTORS)
R3
ERJ3GEYJ184
180k
Safety
Ref.
No.
Part No.
Part Name & Description
Remarks
Click on the first or last page to see other KX-TG8011RUC / KX-TG8011RUS / KX-TG8011RUT / KX-TG8012RUS / KX-TG8012RUT / KX-TGA800RUC / KX-TGA800RUS / KX-TGA800RUT service manuals if exist.