Read Panasonic KX-TG7125RUS / KX-TG7125RUT / KX-TGA711RUS / KX-TGA711RUT Service Manual online
17
KX-TG7125RUS/KX-TG7125RUT/KX-TGA711RUS/KX-TGA711RUT
6.2.
Battery
6.2.1.
Battery Installation/Replacement
Important:
• Use only the included rechargeable batteries HHR-55AAAB
or HHR-4EPT.
• When replacing batteries, we recommend using the
Panasonic rechargeable batteries P03P.
Notice:
When inserting the batteries:
• Wipe the battery ends (
,
) with a dry cloth.
• Install the batteries without touching the battery ends (
,
) or the unit contacts.
I fully charged the batteries, but the operating time
seems to be short:
seems to be short:
• Wipe the battery ends (
,
) and the unit contacts with a
dry cloth.
6.2.2.
Battery Charge
Place the handset on the base unit or charger for about
7 hours before initial use.
When charging, the battery icon is shown as follows.
7 hours before initial use.
When charging, the battery icon is shown as follows.
When the batteries are fully charged,
remains on the
display.
• The charge indicator lights up when the handset is placed on
the base unit or charger.
Note:
• It is normal for the handset to feel warm during charging.
• If you want to use the unit immediately, charge the batteries
• If you want to use the unit immediately, charge the batteries
for at least 15 minutes.
• Clean the charge contacts of the handset, base unit, and
charger with a soft, dry cloth, otherwise the batteries may
not charge properly. Clean if the unit is exposed to grease,
dust or high humidity.
not charge properly. Clean if the unit is exposed to grease,
dust or high humidity.
6.2.3.
Battery Strength
6.2.4.
Panasonic Ni-MH Battery
Performance (included batteries)
Performance (included batteries)
Note:
• It is normal for batteries not to reach full capacity at the initial
charge. Maximum battery performance is reached after a
few complete cycles of charge/discharge (use).
few complete cycles of charge/discharge (use).
• Actual battery performance depends on a combination of
how often the handset is in use and how often it is not in use
(standby).
(standby).
• Battery operating time may be shortened over time
depending on usage conditions and ambient temperature.
• Even after the handset is fully charged, the handset can be
left on the base unit or charger without any ill effect on the
batteries.
batteries.
• The battery strength may not be displayed correctly after you
replace the batteries. In this case, place the handset on the
base unit or charger and charge for at least 7 hours.
base unit or charger and charge for at least 7 hours.
Click on the first or last page to see other KX-TG7125RUS / KX-TG7125RUT / KX-TGA711RUS / KX-TGA711RUT service manuals if exist.