Read Panasonic KX-TG6811CAB / KX-TG6811CAM / KX-TG6812CAB / KX-TG6821CAB / KX-TG6821CAM / KX-TG6822CAB / KX-TGA681RUB / KX-TGA681RUM Service Manual online
11
KX-TG6811CAB/KX-TG6811CAM/KX-TG6812CAB/KX-TG6821CAB/KX-TG6821CAM/KX-TG6822CAB/KX-TGA681RUB/KX-TGA681RUM
4.4.
Circuit Operation (Base Unit)
General Description:
(BBIC, Flash Memory, EERROM) is a digital speech/signal processing system that implements all the functions of speechcom-
pression, record and playback, and memory management required in a digital telephone answering machine.The BBIC system
is fully controlled by a host processor. The host processor provides activation and control of all that functionsas follows.
pression, record and playback, and memory management required in a digital telephone answering machine.The BBIC system
is fully controlled by a host processor. The host processor provides activation and control of all that functionsas follows.
4.4.1.
BBIC (Base Band IC: IC501)
• Voice Message Recording/Play back
The BBIC system uses a proprietary speech compression technique to record and store voice message in Flash Memory.An
error correction algorithm is used to enable playback of these messages from the Flash Memory.
error correction algorithm is used to enable playback of these messages from the Flash Memory.
• DTMF Generator
When the DTMF data from the handset is received, the DTMF signal is output.
• Synthesized Voice (Pre-recorded message)
The BBIC implements synthesized Voice, utilizing the built in speech detector and a Flash Memory, which stored the vocabulary.
• Caller ID demodulation
The BBIC implements monitor and demodulate the FSK/DTMF signals that provide CID information from the Central Office.
• Digital Switching
The voice signal from telephone line is transmitted to the handset or the voice signal from the handset is transmitted to theTele-
phone line, etc. They are determined by the signal path route operation of voice signal.
phone line, etc. They are determined by the signal path route operation of voice signal.
• Block Interface Circuit
RF part, LED, Key scan, Speaker, Telephone line.
4.4.2.
Flash Memory (IC601) (for KX-TG6821 only)
Following information data is stored.
• Voice signal
ex: Pre-recorded Greeting message, Incoming message
4.4.3.
EEPROM (IC611)
Following information data is stored.
• Settings
ex: message numbers, ID code, Flash Time, Tone/Pulse
RF part
ADPCM
Analog
Front
End
Front
End
&
Multi-
plexer
Multi-
plexer
TEL
Line
Interface
Line
Interface
Digital
Speech
Processor
Speech
Processor
Caller ID
Modem
Modem
Digital TAM System
*1
Flash Memory IC601
*1
Host CPU
BBIC (IC501)
DECT RF system
TDMA/TDD
Mod/Demod
PA/LNA
TDMA/TDD
Mod/Demod
PA/LNA
ADPCM
Keys/ LEDs/ Charge
*1
EEPROM IC611
*1 for KX-TG6821 only
Speaker
*1
Click on the first or last page to see other KX-TG6811CAB / KX-TG6811CAM / KX-TG6812CAB / KX-TG6821CAB / KX-TG6821CAM / KX-TG6822CAB / KX-TGA681RUB / KX-TGA681RUM service manuals if exist.