Read Panasonic KX-TG6711RUB / KX-TG6711RUM / KX-TG6712RUM / KX-TG6721RUB / KX-TG6721RUS / KX-TG6722RUB / KX-TG6711CAB / KX-TG6711CAM / KX-TG6721CAB / KX-TG6721CAM / KX-TG6722CAB / KX-TG6711UAB / KX-TG6711UAM / KX-TG6712UAB / KX-TG6721UAB / KX-TGA671RUB / KX-TGA671RUS Service Manual online
25
KX-TG6711RU/KX-TG6712RU/KX-TG6721RU/KX-TG6722RU/KX-TG6711CA/KX-TG6712CA/KX-TG6721CA/KX-TG6722CA/KX-TG6711UA/KX-TG6712UA/KX-TG672IUA//KX-TGA671EX
8.2.
EEPROM LAYOUT (Handset)
8.2.1.
Scope
The purpose of this section is to describe the layout of the EEPROM (IC3) for the KX-TGA671/TGA672 Handset.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are set during production of the
handset, some are set by the user when configuring the handset, and some during normal use of the phone.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are set during production of the
handset, some are set by the user when configuring the handset, and some during normal use of the phone.
8.2.2.
Introduction
The handset uses a 64k bit serial EEPROM (IC3) for storing volatile parameters. All parameters are set up before the handset
the factory. Some of these are vital for the operation of the hardware so a set of default parameters is programmed before the
actual hardware fine-tuning can be initiated. This document lists all default settings with a short description.
This document lists all default parameters with a short description.
the factory. Some of these are vital for the operation of the hardware so a set of default parameters is programmed before the
actual hardware fine-tuning can be initiated. This document lists all default settings with a short description.
This document lists all default parameters with a short description.
8.2.3.
EEPROM contents
MMI Setting:
Note
(* 1) KX-TG6711/21RU/CA
(* 2) KX-TG6711/21UA
(* 2) KX-TG6711/21UA
MMI1 Setting:
Initial Type
Description
F
The data initialized by only F command
0
The data initialized by F and 0 command
1
The data initialized by F, 0 and 1 command
2
The data initialized by F, 0, 1 and 2 command
3
The data initialized by all command (F, 0, 1, 2, 3)
Country Setting
Description
x
Default - no specific country setting, so revert to default value.
Address Initial
Type
Name
Description
Default value
Country
Setting
04A1
3
EEP_Language
Selected Language for LCD
GERMAN:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5 DENISH:6 DUTCH:7 SWEDISH:8
FINNISH:9
GREEK:10 TURKISH:11 HUNGARIAN:12
PORTUGUESE:13 RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17 CROATIAN:18
CATALAN:19
UKRINIAN:20 SPANISHMEX:21 SLOVENIAN:22
ESTNIAN:23 LITHUANIAN:24
LATVIAN:25 ROMANIAN:26 BULGARIAN:27
SERBIAN:28 MACEDONIAN:29
ALBANIAN:30 PORTUGUESEMEX:31 Reserve:32
HEBREW:33
ARABIC:34 PERSIA:35 HANTAI:36 HANTAI(HK):37
RUSSIAN(BX):38
BELARUS:39 KAZAKHSTAN:40 UZBEKISTAN:41
TAJIKISTAN:42 TURKMENISTAN:43
AZERBAIJAN:44 ARMENIA:45 MOLDOV:46 Reserve:47
CANADAENGLISH:48 USSPANISH:49 USFRENCH:50
GERMAN:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5 DENISH:6 DUTCH:7 SWEDISH:8
FINNISH:9
GREEK:10 TURKISH:11 HUNGARIAN:12
PORTUGUESE:13 RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17 CROATIAN:18
CATALAN:19
UKRINIAN:20 SPANISHMEX:21 SLOVENIAN:22
ESTNIAN:23 LITHUANIAN:24
LATVIAN:25 ROMANIAN:26 BULGARIAN:27
SERBIAN:28 MACEDONIAN:29
ALBANIAN:30 PORTUGUESEMEX:31 Reserve:32
HEBREW:33
ARABIC:34 PERSIA:35 HANTAI:36 HANTAI(HK):37
RUSSIAN(BX):38
BELARUS:39 KAZAKHSTAN:40 UZBEKISTAN:41
TAJIKISTAN:42 TURKMENISTAN:43
AZERBAIJAN:44 ARMENIA:45 MOLDOV:46 Reserve:47
CANADAENGLISH:48 USSPANISH:49 USFRENCH:50
0x01
0x0E(*1)
0x14(*2)
Address Initial
Type
Name
Description
Default value
Country
Setting
0012
F
EEP_LcdContrast
LCD contrast
0x28
x
Click on the first or last page to see other KX-TG6711RUB / KX-TG6711RUM / KX-TG6712RUM / KX-TG6721RUB / KX-TG6721RUS / KX-TG6722RUB / KX-TG6711CAB / KX-TG6711CAM / KX-TG6721CAB / KX-TG6721CAM / KX-TG6722CAB / KX-TG6711UAB / KX-TG6711UAM / KX-TG6712UAB / KX-TG6721UAB / KX-TGA671RUB / KX-TGA671RUS service manuals if exist.