KX-TG6461CAT, KX-TGA641RUT - Panasonic Telephone Service Manual (repair manual). Page 8

Read Panasonic KX-TG6461CAT / KX-TGA641RUT Service Manual online

8
KX-TG6461CAT/KX-TGA641RUT
4.2.
Circuit Operation (Base Unit)
4.2.1.
Outline
Base unit consists of the following ICs as shown in Block Diagram (Base Unit) (P.7).
• DECT BBIC (Base Band IC): IC501
- Handling all the audio, signal and data processing needed in a US DECT base unit
- Controlling the US DECT specific physical layer and radio section (Burst Module Controller section)
- ADPCM code filter for speech encoding and speech decoding (DSP section)
- Echo-cancellation and Echo-suppression (DSP section)
- Any tones (tone, sidetone, ringing tone, etc.) generation (DSP section)
- DTMF receiver (DSP section)
- Clock Generation for RF Module
- ADC, DAC, timer, and power control circuitry
- All interfaces (ex: RF module, EEPROM, LED, Analog Front End, etc.)
- RF Tranceiver (LNA Mixer IF Filter, Modulator/Demodulator, PLL, Vco)
• EEPROM: IC561
- Temporary operating parameters (for RF, etc.)
• FLASH MEMORY: IC541
- Voice Prompt (TAM) D/L Area
- ICM/OGM/MEMO Recording Area
• TAM Companion: IC201
- Voice data compression and decompression
- Speaker Amp
• Additionally,
- Power Supply Circuit (+4.0 V, +3.3 V, +2.5 V, +1.8 V output)
- Crystal Circuit (10.368 MHz)
- Telephone Line Interface Circuit
Page of 96
Display

Click on the first or last page to see other KX-TG6461CAT / KX-TGA641RUT service manuals if exist.