Read Panasonic KX-TG5521RUB / KX-TGA551RUB Service Manual online
81
KX-TG5521RUB/KX-TGA551RUB
15.2. Cabinet and Electrical Parts (Handset)
Note:
(*1) This cable is fixed by welding. Refer to How to Replace the Handset LCD (P.48).
(*2) The rechargeable Ni-MH battery P03P or HHR-4NGE is available through sales route of Panasonic.
(*3) Attach the spacer (No. 116) to the exact location described <fig.1>.
(*4) Attach the DOUBLE-SIDED TAPE to the exact parts refer to <fig.2>.
(*5) This SPACER is cut from the excess parts of SPACER (No.108). Attach this SPACER to the exact location described
<fig.3>.
(*2) The rechargeable Ni-MH battery P03P or HHR-4NGE is available through sales route of Panasonic.
(*3) Attach the spacer (No. 116) to the exact location described <fig.1>.
(*4) Attach the DOUBLE-SIDED TAPE to the exact parts refer to <fig.2>.
(*5) This SPACER is cut from the excess parts of SPACER (No.108). Attach this SPACER to the exact location described
<fig.3>.
103 (*4)
101
104
105
E104
E102
E105
E111
E101(*1)
109
E106
E108
102
E103
E107
E109
E110
MIC100
107
103 (*4)
103 (*4)
106
110
B
PCB100
108
112
113
117
(*2)
115
116 (*3)
B
114
111
Ref.No.
Ǿ28 mm
B
Figure
Spacer (No.116)
Battery cover
Put it in the center.
Stick it between
ribs.
ribs.
Double-sided tape (No.103)
< Fig.1 >
< Fig.1 >
< Fig.2 >
108 (*5)
Stick it as shown figure.
< Fig.3 >
Stick to it on
the Rib center
of the above
figure.
Cover the Rib
completely.
the Rib center
of the above
figure.
Cover the Rib
completely.
RIB
Put it along this line.
Stick it as shown figure.
Click on the first or last page to see other KX-TG5521RUB / KX-TGA551RUB service manuals if exist.