Read Panasonic KX-TG5511CAB / KX-TG5511CAJ / KX-TGA550RUB / KX-TGA550RUJ / KX-TGA551RUB / KX-TGA551RUJ (serv.man2) Service Manual online
29
KX-TG5511CA/KX-TGA550RU/KX-TGA551RU
9.1.3.2.
Handset
Note:
(*1) Refer to Troubleshooting by Symptom (Handset) (P.40)
Cross Reference:
Check Point (Handset) (P.40)
Power Supply Circuit/Reset Circuit (P.13)
Power Supply Circuit/Reset Circuit (P.13)
Check around Power Supply Circuit/Reset Circuit.
Check BBIC (IC1)
Does Handset make link with Base Unit?
(Correct working unit)
(Correct working unit)
Check around X1 and IC801 and adjust
clock frequency.
Refer to Check Point...(H).
clock frequency.
Refer to Check Point...(H).
NO
NO
NO
NO (*1)
NO
Is the voltage of "1.8V" about 1.8 V?
Refer to Check Point...(A).
Refer to Check Point...(A).
YES
YES
YES
YES
YES
YES
NO
NO
NO
Replace with a new Circuit Board.
Is the voltage of CP3.0V about 3.0 V?
Refer to Check Point...(Q).
Refer to Check Point...(Q).
Does the RF clock (CLK) oscillate: 10.368 MHz
in Handset Test Mode?
Refer to Check Point...(H).
in Handset Test Mode?
Refer to Check Point...(H).
YES
Is the NTP value OK?
Refer to Check Point...(I).
Refer to Check Point...(I).
Does Handset make link with CMD60 in
Handset Test Mode?
Refer to Check Point...(I).
Handset Test Mode?
Refer to Check Point...(I).
NO
Handset is OK. Check Base Unit.
YES
OK
Is there CMD60 (: DECT Tester)?
NO
NO
YES
Is the modulation OK?
Refer to Check Point...(J).
Refer to Check Point...(J).
YES
Is the Frequency Offset OK?
Refer to Check Point...(K).
Refer to Check Point...(K).
Adjust C10 voltage to 1.8 V.
Refer to Check Point...(A).
Refer to Check Point...(A).
... Continued to the next page.
Is the voltage of CP4.0V about 4.0 V?
Refer to Check Point...(R).
Refer to Check Point...(R).
Click on the first or last page to see other KX-TG5511CAB / KX-TG5511CAJ / KX-TGA550RUB / KX-TGA550RUJ / KX-TGA551RUB / KX-TGA551RUJ (serv.man2) service manuals if exist.