Read Panasonic KX-TG2511UAM / KX-TG2511UAN / KX-TG2511UAS / KX-TG2511UAT / KX-TG2512UAM / KX-TG2512UAT / KX-TGA250RUM / KX-TGA250RUN / KX-TGA250RUS / KX-TGA250RUT Service Manual online
41
KX-TG2511UA/KX-TG2512UA/KX-TGA250RU
(K)* Frequency Offset Confir-
mation
-
Follow steps 1 to 3 of (I).
4.Confirm that the frequency Offset is < ± 50 kHz.
IC1,
C802~C806,
C808~C814,
C819~C820,
C808~C814,
C819~C820,
C822,
C825~C827,
C834,
C860~C864,
L801~L804,
DA801,
R801~R808
(L)* Frequency Drift Confir-
mation
-
Follow steps 1 to 3 of (I).
4.Confirm that the frequency Drift is < ± 35 kHz/ms.
IC1,
C802~C806,
C808~C814,
C819~C820,
C808~C814,
C819~C820,
C822,
C825~C827,
C834,
C860~C864,
L801~L804,
DA801,
R801~R808
(M)*
Sensitivity Receiver
Confirmation
-
Follow steps 1 to 3 of (I).
4.Set DECT tester power to -88 dBm.
5.Confirm that the BER is < 1000 ppm.
5.Confirm that the BER is < 1000 ppm.
IC1,
C802~C806,
C808~C814,
C819~C820,
C808~C814,
C819~C820,
C822,
C825~C827,
C834,
C860~C864,
L801~L804,
DA801,
R801~R808
(N)* Power RAMP Confirma-
tion
-
Follow steps 1 to 3 of (I).
4.Confirm that Power RAMP is matching.
IC1,
C802~C806,
C808~C814,
C819~C820,
C808~C814,
C819~C820,
C822,
C825~C827,
C834,
C860~C864,
L801~L804,
DA801,
R801~R808
(O) Audio Check and Confir-
mation
-
1. Link to BASE which is connected to Line Simulator.
2. Set line voltage to 48V and line current to 50mA.
3. Input -45dBm(600.)/1kHz to MIC of Handset. Measure the Level at Line I/F and
2. Set line voltage to 48V and line current to 50mA.
3. Input -45dBm(600.)/1kHz to MIC of Handset. Measure the Level at Line I/F and
distortion level.
4. Confirm that the level is -2.5dBm ± 2 dBm and that the distortion level is <5% at
TEL Line (600. Load).
5. Input -23dBm(600.)/1kHz to Line I/F. Measure the Level at Receiver of Handset
and distortion level (Receive volume set to second position from minimum).
6. Confirm that the level is -22dBm ± 2 dBm and that the distortion level is <5% at
Receiver (150. Load).
IC1, C12, C96,
C97, R215,
R27, RA4,
C11, C13,
R28, D3, D4,
MIC, R73, R74
(P) SP phone Audio Check
and Confirmation
-
1. Link to Base which is connected to Line Simulator.
2. Set line voltage to 48V and line current to 50mA.
3. Set the handset off-hook using SP-Phone key.
4. Input -23 dBm(600.)/1KHz to Line I/F and measure Receiving level at SP+ and
2. Set line voltage to 48V and line current to 50mA.
3. Set the handset off-hook using SP-Phone key.
4. Input -23 dBm(600.)/1KHz to Line I/F and measure Receiving level at SP+ and
SP-.
5. Confirm that the level is -11.0 dBm ± 2 dBm and that the distortion level is <
5%. (vol = 3)
IC1, C12, C73,
D13, D14,
R73, R74,
R73, R74,
MIC, C11,
C13, RA4,
R27, R28,
C96, C97,
C96, C97,
R215, C72
(Q)
Charge Pump 3.0V
Supply Confirmation
CP3.0V
1. Confirm that the voltage between testpoint CP3.0V and GND is 3.0 ± 0.3.
C49, C52~C54
(R)
Charge Pump 4.0V
Supply Confirmation
CP4.0V
1. Confirm that the voltage between testpoint CP4.0V and GND is 4.0V ± 0.3V.
C50, C51, C55
Items
Check
Point
Procedure
Check or
Replace Parts
Click on the first or last page to see other KX-TG2511UAM / KX-TG2511UAN / KX-TG2511UAS / KX-TG2511UAT / KX-TG2512UAM / KX-TG2512UAT / KX-TGA250RUM / KX-TGA250RUN / KX-TGA250RUS / KX-TGA250RUT service manuals if exist.