Read Panasonic KX-TCD961GB Service Manual online
KX-TCD961GB
8
USING THE BELT CLIP
You can hang the handset on your belt or pocket using the belt clip.
To remove the belt clip
SELECTING THE DIALING MODE
You can program the dialling mode to tone or pulse. If you have touch tone service, set to tone. If rotary or pulse service is
used, set to pulse. The factory preset is tone.
Make sure that the power is ON and the unit is in the stand-by mode.
used, set to pulse. The factory preset is tone.
Make sure that the power is ON and the unit is in the stand-by mode.
Fig. 14
Fig. 15
1
Press
then .
Press .
3
Enter the base unit password.
•
The factory preset is 0000.
3
INT’
Ex. Tone is selected.
5
To select Pulse, press .
OR
To select Tone, press .
OR
To select Tone, press .
6
Press .
•
A confirmation tone sounds and the display
will return to the stand-by mode.
will return to the stand-by mode.
1
2
4
Press .
•
The current mode is displayed.
1:Tone
1:Tone
2:Pulse
1
•
If 5 beeps sound in step 3, the entered password is
incorrect. Enter the correct password.
incorrect. Enter the correct password.
•
To cancel during programming, press ,
then start from step 1.
then start from step 1.
Click on the first or last page to see other KX-TCD961GB service manuals if exist.