KX-TCD961GB - Panasonic Telephone Service Manual (repair manual). Page 7

7

At the time of shipment, the batteries
are not charged. To charge, place
the handset on the base unit. Please
charge the batteries for about
4 hours before initial use.

•

The charge indicator (        ) lights.

When "         " flashes or the unit beeps every
15 seconds, recharge the batteries.

After your Panasonic batteries are fully charged:

(Flashing)

You can check the present battery strength on the display.

•

Battery life may vary depending on usage conditions and ambient temperature.

•

Clean the handset and the base unit charge contacts with a soft, dry cloth.
Clean if the unit is subject to grease, dust or high humidity. Otherwise the batteries
may not charge properly.

•

If the batteries are fully charged, you do not have to place the handset on the base unit until
"         " flashes. This will maximize the battery life.

•

The batteries cannot be overcharged.

•

Nickel metal hydride (Ni-MH) rechargeable batteries (AAA size) are available.
* When you use the Ni-MH batteries, the battery strength will not be displayed correctly.

Charge Indicator (         )

OR

While in use (Talk)

While not in use (Stand-By)

Up to about 6 hours

Up to about 65 hours

Up to about 12 hours

Up to about 130 hours