Read Panasonic KX-TCD958RUC Service Manual online
6.2.5. HOOKSWITCH (AND PULSE DIALING) (SEE Fig. 22)
T8 is the hookswitch, driven by T9. When the phone is “off-hook”, the HOOK control signal from the BBIC will be a high logic level
(+3V), and both transistors will be on, thus T8 will “loop” the line. The zenner diode D10 protects transistor T13 against transient
line voltages.
(+3V), and both transistors will be on, thus T8 will “loop” the line. The zenner diode D10 protects transistor T13 against transient
line voltages.
6.2.6. PULSE DIALING (SEE Fig. 22)
During pulse dialing the hookswitch (T8, T9) is used to generate the pulses using the HOOK control signal, which is set high during
pulses. To force the line impedance low during the “pause” intervals between dial pulses, the PAUSE-DIAL signal turns on T11,
(increases current), thus reducing line impedance (see 8.3.10. BATTERY CHARGER)
pulses. To force the line impedance low during the “pause” intervals between dial pulses, the PAUSE-DIAL signal turns on T11,
(increases current), thus reducing line impedance (see 8.3.10. BATTERY CHARGER)
6.2.7. AUDIO CIRCUITS (SEE Fig. 22)
The line output signal from the BBIC RXAF is amplified by T13. The RXAF line is DC coupled to T13 thus making it work as a
current limiter (typically < 8mA). The emitter load of T13 is complex to achieve the correct frequency response, since the line load
is also complex. The line input signal TXAF is taken from the junction of R41 and R70. Phase cancellation of the line output audio
occurs at this point, so that only incoming line audio should be passed to the BBIC on TXAF.
current limiter (typically < 8mA). The emitter load of T13 is complex to achieve the correct frequency response, since the line load
is also complex. The line input signal TXAF is taken from the junction of R41 and R70. Phase cancellation of the line output audio
occurs at this point, so that only incoming line audio should be passed to the BBIC on TXAF.
Circuit Diagram
Fig. 22
19
KX-TCD958RUC
Click on the first or last page to see other KX-TCD958RUC service manuals if exist.