Read Panasonic KX-TCD755RUS Service Manual online
Address
Default
Name
Type
Description
1F0A
37
BuzzerCurrent
D
Current consumption when Buzzer is playing. This value
should not include any other consumptions than that of the
buzzer.
BuzzerCurrent[eeprom]=consumption[mA]
01FB
78
FastChargeCurrent
D
Charge-current when in fast charge[mA]
The handset is in fast charge-mode when battery-capacity
is less than (chargeTopLimit/100)*MaxCapacity
(BatteryCapacity<ChargeTopLimit%ofMaxCapacity)
1F0C
64
TopChargeCurrent
D
ChargeCurrent when in topoff charge[mA]
The handset charge the batteries with TopChargeCurrent
[mA] when the battery capacity is between
(ChargeTopLimit/100) * Max9NiMH or NiCd) capacity and
´Maxcapacity
(ChargeTopLimit%of MaxCapacity<BatteryCapacity
<maxCapacity)
1F0D
0A
MaintainCurrent
D
Charge-currnt when in maintenance mode needed to
maintain full charge on battery[mA].
This should not include the consumption of the handset
which is handled seperately,
but only the current needed to keep battery at full charge.
(BatteryCapacity=MaxCapacity)
1F0E
5A
TopLimit
D
Percent of max battery capacity to be charged with fast
charge.
When BatteryCapacity reach this limit, the chargecurrent is
switched from FastChargeCurrent to TopChargeCurrent.
1F0F-1F10
00 00
BatteryCap
D
The Current-Capacity left on the battery.
This capacity will always be less than or equal to
MaxCapacity.
It is only used for controlling icons for howmuch capacity is
left on the batteries.
BatteryCapacity[eeprom] = Capacity{mAH]*40[mAh*2/80]=
mAmin*2]4/3(that is 4/3*mA for 2 min)
BatteryCapacity[eeprom] = Capacity{mAH]*40[mAh*2/80]=
mAmin*2]4/3(that is 4/3*mA for 2 min)
17.3.17. VolumeSettings
Address
Default
Name
Type
Description
1F11
10
BeepVolSetting
D
Soundlevel of buzzerbeeps, who is not affected by the
ringervolume.
Hightime = Cycle/VolumeLevel
17.3.18. RedialFAT
Address
Default
Name
Type
Description
1F12-1F1B
80..8
RedialFAT
D
"FileAllocationTable" - for the RedialList
If msb is set it means location is empty
17.3.19. AudioGains
Address
Default
Name
Type
Description
1F1C
16
GX-index
D
Gain-transmit (values ranging from 0x00 to 0x24, each step
representing 1dB). The index represent volumestep 2. See
table.
1F1D
59
GR-index
D
Bit7 - AOG
IBit6 - AOG2
Gain-receive (values ranging from 0x00 to 0x24, each step
representing 1dB). The index represent volumestep 2. See
table.
1F1E
04
SideToneGain
D
SideToneGain (T67DSP-PPV2xD4-7600, table 1.10)
1F1F
11
SpPhGX-index
D
Gain-transmit for speakerphone (values ranging from 0x00
to 0x24, each step representing 1dB). The index represent
volumestep 3. See table.
1F20
98
SpPhGR-index
D
Bit7 - AOG when speakerphone
Bit6 - AOG2 when speakerphone
Gain-receive for speakerphone (values ranging from 0x00
to 0x2A1, each step representing 1dB). The index
represent volumestep 3. See table.
1F22
01
SpPhEnableState
D
Indicates in what state the chip-enable on HF-AM1 has to
be to enable the speakerphone-amplifier
0x01 - P0.7(SP_AMP) set to high enables HF_AM1
0x00 - P0.7(SP_AMP) set to high enables HF_AM1
1F23
16
HeadsetGX-index
D
Gain-transmit when headset mounted (values ranging from
0x00 to 0x24, each step representing 1dB). The index
represent volumestep 2. See table.
78
KX-TCD755RUS
Click on the first or last page to see other KX-TCD755RUS service manuals if exist.