KX-TCD700 - Panasonic Telephone Service Manual Supplement (repair manual). Page 3

Read Panasonic KX-TCD700 Service Manual Supplement online

2.1. THE BASE BAND SECTION
(Changed from original section 6.1. THE BASE BAND SECTION)
2.1.1. THE BASE-BAND INTEGRATED CIRCUIT (BBIC)
(Changed from original section 6.1.2. THE BASE-BAND INTEGRATED CIRCUIT (BBIC))
The PMB6720 (IC1) is a CMOS device designed to handle all the audio, signal and data processing needed in a DECT
handset. It contains a "burst mode controller" which takes care of DECT specific physical layer and radio section control.
It also contains an ADPCM codec filter used for speech encoding and decoding in the DSP section, a general purpose
microcontroller, various other ADC´s, DAC´s, timers and power control circuitry. It connects to the EEPROM (IC2) via a serial
interface (SDA and SDC). This serial interface is also used during manufacture and service to connect to an external computer.
The CPU contains 88k of ROM, so there is no need for any external memory provision.
(Original section 6.1.3. FLASH ROM has been deleted)
2.1.2. EEPROM (SEE Fig. 24)
(Changed from original section 6.1.4. EEPROM (SEE Fig. 24))
The electrically erasable PROM IC2 is used to store all the temporary operating parameters for the handset (see EEPROM
LAYOUT). It uses a two-line serial data interface with the BBIC, with bi-directional data on IC2 pin5 (TP52), and a 45 kHz
clock on pin 6 (TP53).
2.1.3. FACTORY SERIAL PORT (SEE Fig. 24)
(Changed from original section 6.1.5. FACTORY SERIAL PORT (SEE Fig. 24))
In order to communicate with the handset during manufacture and servicing (using a PC) a serial data link has been provided.
Serial data input/output is provided through the I2DAT input (pin 64). The data is clocked through using the I2CLK pin (65). Test
probe pads SDA and SDC are provided for Flash PROM download with I2DAT and I2CLK respectively.
To invoke the flash PROM download mode the MODE_SEL test pad must be connected to the 2.65V pad.
A Ground reference solder pad is also provided.
Fig.24
3
KX-TCD700SERIES
Page of 13
Display

Click on the first or last page to see other KX-TCD700 service manuals if exist.