Read Panasonic KX-TC1045RUB Service Manual online
7 ADJUSTMENTS (HANDSET)
If your unit have below symptoms, adjust each item using remedy column from the table.
Symptom
Remedy
The movement of Battery Low Indicator is wrong.
Make confirmation in item (A)
The base unit does not respond to a call from handset.
Make adjustment in item (B)
The base unit does not transmit or the transmit frequency is off. Make adjustment in item (C)
The transmit frequency is off.
The transmit frequency is off.
Make confirmation in item (D)
The transmit power output is low, and the operating
distancebetween base unit and handset is less than normal.
Make confirmation in item (E)
The reception sensitivity of base unit is low with noise.
Make adjustment in item (F)
Does not link between base unit and handset.
Make confirmation in item(G)
The reception level is high or low.
Make adjustment in item (H)
The transmit level is high or low.
Make adjustment in item (I)
Unit condltion:
1. Remove the antenna lead wire from P.C Board of handset.
2. Power Supply: DC 3.9V
3. Speaker Load: 150
1. Remove the antenna lead wire from P.C Board of handset.
2. Power Supply: DC 3.9V
3. Speaker Load: 150
Ω
CH
TX Frequency
RX Frequency
CH10 40.000MHz
30.300MHz
How to set the test mode.
CH10 Test Mode
CH10 Test Mode
13
KX-TC1045RUB
Click on the first or last page to see other KX-TC1045RUB service manuals if exist.