Read Panasonic KX-TC1005RUC / KX-TC1005RUB / KX-TC1005RUW Service Manual online
26.2. RECEIVER SIGNAL CIRCUIT
26.2.1. Circuit Operation:
After getting the 450 kHz signal, it is input to Pin 33 of IC101 and passes through IF AMP and Detector Circuit, then output to Pin
26. AF signal flows through R123, C124. Its level is controlled by the VOLUME CONTROL Amp of IC101.
The signal is received at Pin 25 of IC101, then it passes through the following circuits: PREAMP, Expander and Amplifier: It goes
out at Pin 16 and finally is sent to the SP.
Inside IC101, RX-MUTE, MIC-MUTE and PLL circuits are controlled by the serial data sent from Pins 28 , 29 and 30 of IC901.
26. AF signal flows through R123, C124. Its level is controlled by the VOLUME CONTROL Amp of IC101.
The signal is received at Pin 25 of IC101, then it passes through the following circuits: PREAMP, Expander and Amplifier: It goes
out at Pin 16 and finally is sent to the SP.
Inside IC101, RX-MUTE, MIC-MUTE and PLL circuits are controlled by the serial data sent from Pins 28 , 29 and 30 of IC901.
47
KX-TC1005RUC / KX-TC1005RUB / KX-TC1005RUW
Click on the first or last page to see other KX-TC1005RUC / KX-TC1005RUB / KX-TC1005RUW service manuals if exist.