Read Panasonic KX-NT553RU-B / KX-NT556RU-B Service Manual online
7
KX-NT553RU/KX-NT553RU-B/KX-NT556RU/KX-NT556RU-B
4.2.
Circuit Operations
4.2.1.
LCD Circuit (Main LCD/Selflabeling LCD)
LCD data are output from pin E17 of IC502 to LCD module.
LCD contrast is set by electronic volume in LCD module.
+3.3V of the power supply voltage is pressurized about four/three times in the LCD module and used as LCD driving voltage
MainLCD : 10v (KX-NT553 MainLCD), 13.5v (KX-NT556)
SelflabelingLCD : Approx 15v (Selflabeling)
The driving voltage is observed between Pin 12 (V0) and Pin 13(XV0) of CN502 (Main LCD).
The driving voltage is observed between Pin 4 (V0) and Pin 3 (XV0) of CN505 (Self-Laeling LCD).
The back light for Self-Labeling is controlled by Q102.
LCD contrast is set by electronic volume in LCD module.
+3.3V of the power supply voltage is pressurized about four/three times in the LCD module and used as LCD driving voltage
MainLCD : 10v (KX-NT553 MainLCD), 13.5v (KX-NT556)
SelflabelingLCD : Approx 15v (Selflabeling)
The driving voltage is observed between Pin 12 (V0) and Pin 13(XV0) of CN502 (Main LCD).
The driving voltage is observed between Pin 4 (V0) and Pin 3 (XV0) of CN505 (Self-Laeling LCD).
The back light for Self-Labeling is controlled by Q102.
The lighting of the backlight is controlled by Q101 (Main LCD).
The PWM (Pulse Width Modulation) signal is output from IC502-U13 (Main), IC502-V13 (Self) pin and the brightness is changed
according to its duty ratio.
The PWM (Pulse Width Modulation) signal is output from IC502-U13 (Main), IC502-V13 (Self) pin and the brightness is changed
according to its duty ratio.
(Main LCD)
Click on the first or last page to see other KX-NT553RU-B / KX-NT556RU-B service manuals if exist.