Read Panasonic AG-MX70E / AG-MX70MC / AG-YA70P / AG-VE70P Service Manual online
INF-4
5. On AG-MX70, press and hold LUM, AUDIO, EFFECTS ON and
5 and switch the power on. AG-
MX70 comes on in the flash memory writing mode.
6. Press
+
–
on AG-MX70 to change the items on the LCD.
To up date M1C, select [MX70 Flash Write Mode]
To update SH3, select [SH3 Flash Write Mode]
To update SH3, select [SH3 Flash Write Mode]
Then press
¿
(the arrow key at the bottom right of the numbered buttons).
7. Wait until the display on the LCD changes from “Now Flash Erase Please Wait” to “Flash Erase Finish
Please Send Data”.
8. In Version Up Tool 1.00, press the “Browse” button in the M16C Update column to update M16C, or
the “Browse” button in SH3 Update to update SH3, and select the writing file.
This is not necessary if the writing file is already in the box.
This is not necessary if the writing file is already in the box.
9. Writing starts when you press the Send button, next to the Browse button.
Confirm that “Now Flash Writing” appears on AG-MX70’s LCD.
If the message doesn’t appear or an error occurs, check the connections and start again.
If the message doesn’t appear or an error occurs, check the connections and start again.
10.
Writing is complete when “Flash Write Complete Please Restart System” appears on AG-MX70’s
LCD.
LCD.
11.
Switch AG-MX70 off then on again and enter the SETUP menu. The version information appears by
pressing and holding SHIFT and
pressing and holding SHIFT and
8
for 3 seconds. Confirm that the version has changed.
Click on the first or last page to see other AG-MX70E / AG-MX70MC / AG-YA70P / AG-VE70P service manuals if exist.