Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online
DIS-7
10. Removal of LCD Unit
1. Remove the Handle Unit.
2. Remove the Side Case (R) Unit.
3. Unscrew the 2 screws (S) and remove the SIDE
2. Remove the Side Case (R) Unit.
3. Unscrew the 2 screws (S) and remove the SIDE
(R) SHIELD PLATE (NOTE: Picture does not
shown below about 2 screws (S) and SIDE (R)
SHIELD PLATE).
shown below about 2 screws (S) and SIDE (R)
SHIELD PLATE).
4. Unscrew the 2 screws (T) and remove the HINGE
COVER.
5. Remove the FPC LOCK SHEET.
6. Disconnect a connector P4606 on R-SIDE C.B.A..
7. Unscrew the 2 screws (U) and remove the LCD
6. Disconnect a connector P4606 on R-SIDE C.B.A..
7. Unscrew the 2 screws (U) and remove the LCD
Unit.
NOTE: When installing a TAPE and FPC LOCK
SHEET, put on the original position.
SCREW (T)
P4606
TAPE
FPC LOCK SHEET
GOLD
6mm
SCREW (T)
GOLD
5mm
SCREW (S)
HINGE COVER
SCREWS (B)
LCD PANEL UNIT
GOLD
6mm
SCREW (U)
Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.