Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online
INF-14
7. SOFTWARE
This unit have two pieces of microprocessor and two pieces of EEPROM
---
Camera board
VTR board
Microprocessor IC301
IC2001
EEPROM IC307 IC2008
7-1. Software Version Display
7-1-1. Camera EEPROM Version
1. Press the MENU button while pressing the ADUB button and REW button at the same time, DIAGNOSTIC and
ADJUST menu can be displayed (Service menu mode).
2. Open the “9. ADJUST MENU”.
3. Select the item “DEBUG INF” and set to ON.
4. Press MENU button to move to normal screen from menu screen.
5. Set the GAIN SW to H position.
6. The numerical value, which is indicated as version. It display on lower right corner as indicated as below.
3. Select the item “DEBUG INF” and set to ON.
4. Press MENU button to move to normal screen from menu screen.
5. Set the GAIN SW to H position.
6. The numerical value, which is indicated as version. It display on lower right corner as indicated as below.
7-1-2. VTR EEPROM Version
VTR EEPROM version is displayed on ADJUST menu (refer to item 5-2-5 on page INF-12).
7-1-3. VTR & CAMERA Microprocessor Software Version
VTR and CAMERA microprocessor software version is displayed on DIAGNOSTIC menu (refer to item 5-1-1 on
page INF-8).
page INF-8).
50 00
For example, in case of Ver00, displayed as 00.
(COMPONENT SIDE)
CAMERA C.B.A.
IC301
(FOIL SIDE)
CAMERA C.B.A.
IC307
(FOIL SIDE)
VTR C.B.A.
IC2001
IC2008
Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.