Read Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual online
INF-4
SECTION 1 SERVICE INFORMATION
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
11 Connecting terminals (
page 30)
12
13 Air intake port
2
3
1
5
4
r
Top
r
Bottom
:
Projection direction
1 Vertical lens shift dial
Adjusts the projecting position in the vertical direction (vertical
shift).
2 Control panel and Indicators
3 Lamp cover
The luminous lamp is inside.
4 Air exhaust port
5 Burglar hook port
5 Burglar hook port
Attaches a burglar prevention cable, etc.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r
Control panel and Indicators
8
9
10
1
2
3
4
3
4
6
5
7
1 Power button <v/b> (v Standby / b Power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the luminous lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Ambient luminance sensor
6 <MENU> button
6 <MENU> button
Displays or hides the main menu.
When the sub menu is displayed, pressing it will return to the
previous screen.
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project.
9 asqw buttons
Used to select the menu screen items, switch the setting or
adjust the level.
Also used to enter a password in the [SECURITY] menu or enter
characters
10 <AUTO SETUP/CANCEL> button
Used to
automatically adjust with auto setup function while
projecting the image . It is also used to operate
the Memory Viewer screen and the idle screen of MIRRORING
input and Panasonic APPLICATION input.
ENGLISH - 29
Chapter 1 Preparation - About your projector
Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.