Read Panasonic PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT (serv.man5) Service Manual online
INF-3
SECTION 1 SERVICE INFORMATION
1. 2. Control panel
6
11
14
15
16
Projection direction
r
Bottom
r
Top
14 Control panel and Indicators
15 Lamp cover
The lamp unit is inside.
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel and Indicators
1
Power button <v/b>
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
6 <MENU> button
Displays or hides the main menu.
(
Æ
page 53)
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project. (
Æ
page 47)
9 asqw buttons
Navigates the menu screen.
And use qw to adjust the volume level, use as to
page up or page down files such as PowerPoint
And use qw to adjust the volume level, use as to
page up or page down files such as PowerPoint
®
through
wireless manager.
10 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while
projecting the image.(
projecting the image.(
Æ
page 46)
In addition, it acts as <CANCEL> button when using the
MEMORY VIEWER function.
26 - ENGLISH
Chapter 1 Preparation - About your projector
6
11
14
15
16
Projection direction
r
Bottom
r
Top
14 Control panel and Indicators
15 Lamp cover
The lamp unit is inside.
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel and Indicators
1
Power button <v/b>
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
6 <MENU> button
Displays or hides the main menu.
(
Æ
page 53)
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project. (
Æ
page 47)
9 asqw buttons
Navigates the menu screen.
And use qw to adjust the volume level, use as to
page up or page down files such as PowerPoint
And use qw to adjust the volume level, use as to
page up or page down files such as PowerPoint
®
through
wireless manager.
10 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while
projecting the image.(
projecting the image.(
Æ
page 46)
In addition, it acts as <CANCEL> button when using the
MEMORY VIEWER function.
26 - ENGLISH
Chapter 1 Preparation - About your projector
Click on the first or last page to see other PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT (serv.man5) service manuals if exist.